(D) Insulation

They have incredible insulation, so let's put some incredible insulation here.

F insulation factor

F insulation factor

Jacket means the outer insulation cover or cladding which may be part of the insulation system

L thickness of insulation layer m

F insulation factor 1 (non insulated)

L thickness of insulation layer m

(iii) with insulation (see 6.6.3.2.12) 50 C

L thickness of the insulation layer 0.075 m

(i) without insulation or sun shield 60 C

Insulation, better design, buy green electricity where you can.

effectiveness of the insulation system (heat influx)_Watts (W)

(i) An increase in the insulation system effectiveness from using

K heat conductivity of insulation layer W.m 1.K 1

In all cases, insulation systems approved for this purpose shall

6.6.3.2.12 When the shells intended for the transport of non refrigerated liquefied gases are equipped with thermal insulation, the thermal insulation systems shall satisfy the following requirements

K heat conductivity of the insulation layer W.m 1.K 1

(a) the effectiveness of the insulation system, determined in accordance with 6.6.4.2.8.2

You know we use PVC, and we sheath wires with PVC for insulation.

(ii) the same thickness of a different insulating material having better insulation properties

U K L heat transfer coefficient of the insulation W.m 2.K 1

(a) a jacket and one or more inner shells where the space between the shell(s) and the jacket is exhausted of air (vacuum insulation) and may incorporate a thermal insulation system or

(d) The thermal insulation shall not inhibit access to the fittings and discharge devices.

TP17 Only inorganic non combustible materials shall be used for thermal insulation of the tank.

U thermal conductance of the insulation, in kW m 2 K 1, at 38 C

(e) protection of the portable tank from impact or overturning by a vacuum insulation jacket.

Walls and roofs Improved insulation can reduce the heating and cooling load by 25 per cent.

Service equipment means measuring instruments and filling, discharge, venting, safety, pressurizing, cooling and thermal insulation devices

If the wires in the dynamo are not protected by insulation, the power will be dissipated.

Financial assistance can also be directly offered for specific investments, such as for insulation or cleaner technology

(v) Energy efficiency labelling of construction, thermal insulation products, and in particular for windows and window frames.

Building insulation standards (k values) adapted to the geographical situation of the Parties shall be introduced and

For an insulated IBC or tank, the Model Regulations require that the heat load to the shell be equivalent to the heat transfer through the insulation plus the heat load to the shell on the assumption that 1 of the insulation is missing.

is required. For an insulated tank, the Recommendations require that the heat load to the shell be equivalent to the heat transfer through the insulation plus the heat load to the shell on the assumption that 1 of the insulation is missing.

I don't know if you could see, but I was never able to make insulation for the wires.

6.6.4.2.4 The thermal insulation system shall include a complete covering of the shell(s) with effective insulating materials.

The construction of the dwelling must meet minimum requirements in regard to insulation, light, heating, ventilation and fire prevention.

Payload Unit Multi Layer Insulation (MLI), which is an octagonal structure 4.46 m in diameter and 1.40 m in height

The largest impact is located on the infrared telescope Multi Layer Insulation (MLI), with perforation of diameter of 4.5 mm.

The value of F given above for insulated shells may be taken provided that the insulation is in conformance with 6.6.2.12.2.4.

The value of F given above for insulated shells may be taken provided that the insulation is in conformance with 6.6.3.8.1.2.

6.6.2.12.2.4 Insulation systems, used for the purpose of reducing venting capacity, shall be approved by the competent authority or its authorized body.

In the tests, the reduced scale tank is heated at rates equivalent to that given by complete fire engulfment or, in the case of insulated IBC or tanks, the heat transfer through the insulation with the assumption that 1 of the insulation is missing (see 4.2.1.13.8 and 4.2.1.13.9 of the Model Regulations).

And I had finally got around to doing some draft stripping, installing insulation around the windows and doors to keep out the drafts.