Translation of "lid thickness" to Chinese language:
Examples (External sources, not reviewed)
| Lid Button | Lid 按钮 |
| Ramin, Beit Lid | 拉明 贝特利德 |
| Thickness | 厚度 |
| Thickness | 线宽 |
| The lid won't open. | 這蓋子打不開 |
| When Laptop Lid Closed | 当笔记本电脑盖合上时 |
| When laptop lid closed | 当合上笔记本盖时 |
| Line thickness | 线条粗细 |
| Border thickness | 线条粗细 |
| 6.6.2.4.1 The minimum shell thickness shall be the greater thickness based on | 6.6.2.4.1 最小罐壳厚度应取以下三项中数值最大者 |
| 6.6.3.4.1 The minimum shell thickness shall be the greater thickness based on | 6.6.3.4.1 最小罐壳厚度应取以下两项中数值较大者 |
| 6.6.4.4.1 The minimum shell thickness shall be the greater thickness based on | 6.6.4.4.1 最小罐壳厚度应取以下两项中数值较大者 |
| Has he flipped his lid? | 他是不是胡说八道了? |
| OK, skeptic, lift the lid. | 好 怀疑论者 打开这个盖子 |
| Font border thickness | 线条粗细 |
| The lid closes, it self cleans. | 盖子合上 它就自动清洁 |
| Laptop lid is closed, hibernating now. | 笔记本电脑盖已关闭 现在休眠 |
| Laptop lid is closed, suspending now. | 笔记本电脑盖已关闭 现在待机 |
| 6.6.2.4 Minimum shell thickness | 6.6.2.4 最小罐壳厚度 |
| 6.6.3.4 Minimum shell thickness | 6.6.3.4 最小罐壳厚度 |
| 6.6.4.4 Minimum shell thickness | 6.6.4.4 最小罐壳厚度 |
| thickness (mm reference steel) | 最小罐壳厚度 (单位 mm 参考钢) |
| 6.6.4.4.4 For vacuum insulated tanks, the aggregate thickness of the jacket and the shell shall correspond to the minimum thickness prescribed in 6.6.4.4.2, the thickness of the shell itself being not less than the minimum thickness prescribed in 6.6.4.4.3. | 6.6.4.4.4 真空隔热罐体外皮和罐壳合计厚度应与6.6.4.4.2规定的最小厚度对应 罐壳厚度本身不小于6.6.4.4.3规定的最小厚度 |
| Laptop lid is closed, blanking screen now. | 笔记本电脑盖已关闭 现在黑屏 |
| Laptop lid is closed, shutting down now. | 笔记本电脑盖已关闭 现在关机 |
| Well, that blows the lid, doesn't it? | 就在眼皮底下 是吗 |
| Unmount all shares when the lid is closed | 退出时卸载全部共享 |
| Close the lid, but don't snap the locks. | 把箱盖给盖上 但是锁别扣上 |
| L thickness of insulation layer m | L 隔热层厚度 米 |
| L thickness of insulation layer m | L 隔热层厚度 m |
| Equivalent thickness in reference steel _ mm | 参考钢等效厚度 毫米 |
| (g) An increase in wall thickness provided the thickness stays within the range permitted by the welding procedures specifications | 41.1 概要 |
| The date of manufacture is shown on the lid. | 生产日期在盖子上 |
| Put the lid on. I'm going to raise Oddbod. | 盖上盖子 我去叫起老怪 |
| Two nanometers is 20 atoms in thickness. | 两纳米就是20个原子那么厚 |
| Minimum shell thickness (in mm reference steel) | (单位mm 参考钢) |
| We'll keep the lid on this. I'll deal with it. | 不要说出去 我会摆平的 |
| The thickness of aluminium liner is 2.1 mm. | 铝护面层厚度2.1毫米 |
| L thickness of the insulation layer 0.075 m | 0.075米 U 热传导系数 |
| This action will be performed when the laptop lid gets closed | 当合上笔记本盖时将执行此动作 |
| Yeah. I'll bet they've got a lid on every trash can. | 对 我相信 每个垃圾桶都有盖子 |
| This thickness shall be exclusive of any corrosion allowance. | 厚度不计腐蚀允差 |
| 6.6.2.4.6 The equivalent thickness of a metal other than the thickness prescribed for the reference steel in 6.6.2.4.3 shall be determined using the following equation | 6.6.2.4.6 不同于6.6.2.4.3所述参考钢厚度的某种金属的等效厚度应按下式计算 |
| 6.6.3.4.4 The equivalent thickness of a steel other than the thickness prescribed for the reference steel in 6.6.3.4.2 shall be determined using the following formula | 6.6.3.4.4 不同于6.6.3.4.2所述参考钢厚度的某种钢的等效厚度应按下式计算 |
| I just opened the lid, and a foul smell filled my nose. | 我刚打开锅盖 一股恶臭就扑鼻而来 |
Related searches : Lid - Tank Lid - Toilet Lid - Skid Lid - No Lid - Lid Seal - Flip Lid - Lid Off - Jar Lid - Rear Lid - Lid Cover - Lid Lock - Box Lid
