(a) with a degree of filling, for liquids having a viscosity less than 2,680 mm2 s at 20 oC, of more than 20 but less than 80 unless the shells of portable tanks are divided, by partitions or surge plates, into sections of not more than 7,500 litres capacity

And they're sticking together, forming layers and giving us a sheet on the surface.

The crime kits are used to take vaginal and oral swabs and smears for foreign body fluids.

Environmental viscosity

Six hundred degree F water coming out of the Earth.

Outer ear channels, nostrils, and mouth contain sand and green, mosslike, mucous threads.

Consideration of the effect of these forces can minimize the cost of active control of liquid propellant stages and is a low cost technique for the disposal of solid rocket motor stages.

Consideration of the effect of these forces can minimize the cost of active control of liquid propellant stages and is a low cost technique for the disposal of solid rocket motor stages.

You're allowing fluid or air to go through at steady states.

We're going to do something that in recent years we've started take a mucus sample.

A2.7 Under Criteria insert and mixtures after substances (twice).

In paragraph (3)(c), in the sentence before the equation, replace gases for which filling data are not provided in the table with gases and gas mixtures for which relevant data are not available .

KS Now the reason it's cold is that's it's not actually water loaded into these squirt guns it's a dry liquid developed by 3M.

For Category 2

The liquid is actually that clear liquid.

In the case of low level liquid propulsion for satellites, it has made plans to cooperate with Brazil.

A separating funnel can be used to separate a mixture of fluids of differing densities. A valve at the bottom allows the denser fluid to be drained for transfer to another container.

This box is used to specify the units of the density of the solute. This is required only if you are specifying the amount of solute in terms of volume.

The shell design shall take into account the minimum MAWP values provided in portable tank instruction T50 in 4.2.4.2.6 for each non refrigerated liquefied gas intended for transport.

So imagine that you make a solution full of this sticky material and inject it into the veins of someone who has cancer, everything's going to get lit up.

Name of the refrigerated liquefied gas being transported (and minimum mean bulk temperature)

A pipette bulb is used to fill pipettes. Squeezing then releasing the bulb produces a negative pressure, causing fluid to flow into the pipette squeezing the bulb then causes the fluid to flow out of the pipette.

During filling, the temperature of the refrigerated liquefied gas shall be within the limits of the design temperature range.

in which d15 and d50 are the densities of the liquid at 15 oC and 50 oC, respectively.

For solids and liquids, if the test is performed with the solid or liquid to be transported or with another substance having essentially the same physical characteristics

He was eating this orange, sugary candy that he kept dipping his fingers into, and since there was so much saliva on his hands, this orange paste started to form on his palms.

During filling, the temperature of the non refrigerated liquefied gas shall fall within the limits of the design temperature range.

Liquid War

Water is a liquid.

Water is liquid.

Liquid Pouring

in which df and dr are the densities of the liquid at the mean temperature of the liquid during filling and the maximum mean bulk temperature during transport respectively.

(c) Sprut MBI determination of volumes of intra and extra cellular fluid, total circulating blood volume and the proportion of cellular and fluid blood components in the human body under conditions of weightlessness

4.2.1.9.5.1 The maximum degree of filling (in ) for liquids transported under elevated temperature conditions is determined by the formula

TP3 For liquids transported under elevated temperature conditions the filling limits prescribed in 4.2.1.9.5.1 shall be met.

FluidBalls

Demo Liquid

4.2.2.7.2 The maximum mass of non refrigerated liquefied gas per litre of shell capacity (kg l) shall not exceed the density of the non refrigerated liquefied gas at 50 C multiplied by 0.95.

combination packagings having inner packagings containing liquid dangerous goods

Insert a new column for Category 3 as follows

These are hydraulic brakes. No fluid, they don't work.

Name of non refrigerated liquefied gas(es) permitted for transport

Burets are used to titrate liquids. A buret is filled with a specific volume of a liquid, and placed beneath it is a container such as an Erlenmeyer flask. By opening the valve on the buret, the liquid in the container will then be titrated. High quality burets have a venting mechanism with which they can be very easily refilled with the exact volume for which the buret is calibrated.

FluidBalls

Liquid waste disposal