This device shall also prevent an unacceptable amount of leakage of liquid in the case of overturning or entry of foreign matter into the tank.

External fittings shall be protected so as to preclude the release of the shell contents upon impact or overturning of the portable tank on its fittings.

External fittings shall be protected so as to preclude the release of the shell contents upon impact or overturning of the portable tank on its fittings.

(a) protection against lateral impact which may consist of longitudinal bars protecting the shell on both sides at the level of the median line

4.2.1.2 During transport, portable tanks shall be adequately protected against damage to the shell and service equipment resulting from lateral and longitudinal impact and overturning.

4.2.2.3 During transport, portable tanks shall be adequately protected against damage to the shell and service equipment resulting from lateral and longitudinal impact and overturning.

4.2.3.3 During transport, portable tanks shall be adequately protected against damage to the shell and service equipment resulting from lateral and longitudinal impact and overturning.

(b) protection of the portable tank against overturning which may consist of reinforcement rings or bars fixed across the frame

(e) protection of the portable tank from impact or overturning by a vacuum insulation jacket.

(d) protection of the shell against damage from impact or overturning by use of an ISO frame in accordance with ISO 1496 3 1995.

(d) protection of the shell against damage from impact or overturning by use of an ISO frame in accordance with ISO 1496 3 1995

This device should also prevent an unacceptable amount of leakage of liquid in the case of overturning or entry of foreign matter into the tank.

If the shell and service equipment are so constructed as to withstand impact or overturning it need not be protected in this way.

If the shell and service equipment are so constructed as to withstand impact or overturning it need not be protected in this way.

6.6.2.17.5 When portable tanks are not protected during transport, according to 4.2.1.2, the shells and service equipment shall be protected against damage to the shell and service equipment resulting from lateral or longitudinal impact or overturning.

6.6.3.13.5 When portable tanks are not protected during transport, according to 4.2.2.3, the shells and service equipment shall be protected against damage to the shell and service equipment resulting from lateral or longitudinal impact or overturning.

Pots.

6.6.4.12.5 When portable tanks are not protected during transport, according to 4.2.3.3, the shells and service equipment shall be protected against damage to the shell and service equipment resulting from lateral or longitudinal impact or overturning.

Of course, if the robot were tilted, inclined to the horizontal, then it would accelerate in this direction.

It's better than doing pots.

Road tank vehicles, rail tank wagons, non metallic tanks and intermediate bulk containers (IBCs) are not considered to fall within the definition for portable tanks

And I've got to do the pots all week.

The start to discharge pressure shall, however, in no case be such that liquid would escape from the valve(s) if the portable tank were overturned.

Road tank vehicles, rail tank wagons, non metallic tanks, intermediate bulk containers (IBCs), gas cylinders and large receptacles are not considered to fall within the definition for portable tanks

For tanks

Candy

Kettle, kettle on the hob

Spraycan

Water tanks

Take the pitcher.

(a) Portable tanks The tank shall be filled with water or any other non pressurized substance to approximately 97 of the tank volumetric capacity.

That's 18 shots. We've used two already.

Like a Morandi like the little bottles composing them like a still life.

(b) when leaking

Trailer, water

Trailer, fuel

Tinned salmon.

Canned milk.

Fruit cans.

Canned foods?

The ghee tin

The can is empty.

The jar is empty.

Portable Tanks

Put one can back!