"凸轮曲线"的翻译 使用英语:
字典 中国人-英语
凸轮曲线 - 翻译 :
例子 (外部来源，未经审查)
| 好吧 我开始想出 用凸轮和反馈系统做出线性表达图 这很管用 | Well, I came up with this kind of linear expression thing with these cams and feedback. And that worked pretty well. |
| 不是活塞,而是凸轮 | Not the plug. The cam. |
| 这是第一个驱动Furby的小凸轮 | And there's the first little cam that drove Furby. |
| 曲线的切线 | The line tangent to a curve |
| 曲线的曲率中心 | The center of the osculating circle to a curve |
| 曲线 | curve |
| 曲线 | Squiggly |
| 曲线 | Curve |
| 曲线 | Curved |
| 曲线 | Curve Mode |
| 曲线 | Curves? |
| 曲线的渐屈线 | Evolute of a curve |
| 此曲线的切线 | Tangent to This Curve |
| 此曲线的曲率中心 | Center of Curvature of This Curve |
| 重置曲线为直线 | Reset curve to linear |
| 此曲线的渐屈线 | Evolute of this curve |
| 二次曲线的准线 | Directrix of a Conic |
| 二次曲线的准线 | The directrix line of a conic. |
| 双曲线的渐近线 | Asymptotes of a Hyperbola |
| 曲线是曲线 飞机是飞机 二者不会混淆 | A curve's a curve, a plane's a plane, and the two won't mix. |
| 根据焦点和双曲线上一点构造双曲线 | A hyperbola constructed by its focuses and a point that pertains to it |
| 我在惠普 帕卡德那里做了凸轮切割 | And the cams I got cut at Hewlett Packard. |
| C 曲线 | CCurve |
| 双曲线 | Hyperbola |
| 此二次曲线的切线 | Tangent to This Conic |
| 此三次曲线的切线 | Tangent to This Cubic Curve |
| 每个线条 每个曲线 | Every line... every curve. |
| 绕线轮 | Fishing Reel. |
| 此二次曲线的曲率中心 | Center of Curvature of This Conic |
| 此三次曲线的曲率中心 | Center of Curvature of This Cubic Curve |
| 调节曲线 | Adjust Curves |
| 调节曲线 | Adjust Curve |
| 曲线调整... | Curves Adjust... |
| 光度曲线 | Luminosity Curve |
| 三次曲线 | Cubic |
| 二次曲线 | Quadratic Spline |
| 三次曲线 | Cubic Spline |
| C 曲线Name | C Curve |
| 曲线管道 | Curved pipes |
| 二次曲线 | Conics |
| 选择曲线... | Select the curve... |
| 二次曲线 | conic |
| 二次曲线 | conic arc |
| 三次曲线 | cubic curve |
| 删除曲线 | Remove a Curve |
相关搜索 : 凸轮曲柄 - 线性凸轮 - 凸轮 - 凸轮 - 曲线轮廓 - 凸轮凸角 - 凸轮轮廓 - 凸轮齿轮 - 凸轮滑轮 - 凸轮链轮 - 凸轮廓线变换 - 凸轮环 - 凸轮链 - 凸轮盘
