Thickness

6.6.4.4.4 For vacuum insulated tanks, the aggregate thickness of the jacket and the shell shall correspond to the minimum thickness prescribed in 6.6.4.4.2, the thickness of the shell itself being not less than the minimum thickness prescribed in 6.6.4.4.3.

Just withering in her contempt.

L thickness of insulation layer m

L thickness of insulation layer m

6.6.2.4 Minimum shell thickness

6.6.3.4 Minimum shell thickness

6.6.4.4 Minimum shell thickness

This thickness shall be exclusive of any corrosion allowance.

6.6.3.4.4 The equivalent thickness of a steel other than the thickness prescribed for the reference steel in 6.6.3.4.2 shall be determined using the following formula

6.6.2.4.6 The equivalent thickness of a metal other than the thickness prescribed for the reference steel in 6.6.2.4.3 shall be determined using the following equation

The thickness of aluminium liner is 2.1 mm.

Equivalent thickness in reference steel _ mm

Stamp of expert who performed or witnessed the most recent test _

(ii) is approximately of the same size and mass as the existing equipment and

Shells of more than 1.80 m in diameter shall be not less than 6 mm thick in the reference steel or of equivalent thickness in the steel to be used.

6.6.4.4.6 The equivalent thickness of a metal other than the thickness prescribed for the reference steel in 6.6.4.4.2 and 6.6.4.4.3 shall be determined using the following equation

Shells of more than 1.80 m in diameter shall be not less than 6 mm thick in the reference steel or of equivalent thickness in the metal to be used.

Shells more than 1.80 m in diameter shall be not less than 4 mm thick in the reference steel or of equivalent thickness in the metal to be used.

6.6.4.4.2 Shells of not more than 1.80 m in diameter shall be not less than 5 mm thick in the reference steel or of equivalent thickness in the metal to be used.

Such shells of more than 1.80 m in diameter shall be not less than 4 mm thick in the reference steel or of equivalent thickness in the metal to be used.

Shells more than 1.80 m in diameter shall be not less than 6 mm thick in the reference steel or of equivalent thickness in the metal to be used, except that for powdered or granular solid substances of Packing Group II or III the minimum thickness requirement may be reduced to not less than 5 mm thick in the reference steel or of equivalent thickness in the metal to be used.

It's created depositing layers of about four microns.

Minimum shell thickness (mm reference steel) Bottom opening requir ements

(a) the minimum thickness determined in accordance with the requirements in 6.6.3.4 and

thickness (mm reference steel)

That place is full of sawdust!

6.6.4.4.3 Shells of vacuum insulated tanks of not more than 1.80 m in diameter shall be not less than 3 mm thick in the reference steel or of equivalent thickness in the metal to be used.

e1 required equivalent thickness (in mm) of the steel to be used

Bulletin, Kaplan has dandruff. In that case, I think we should leave.

Holmes? Or is that part just elementary? Maybe they hid in the restroom.

(a) the minimum thickness determined in accordance with the requirements of 6.6.2.4.2 to 6.6.2.4.10

e1 required equivalent thickness (in mm) of the metal to be used

eo minimum thickness (in mm) for the reference steel specified in 6.6.3.4.2

(a) the minimum thickness determined in accordance with the requirements in 6.6.4.4.2 to 6.6.4.4.7 and

All I've got to do is find my lipstick.

What will I give to Yahweh for all his benefits toward me?

What will I give to Yahweh for all his benefits toward me?

What shall I render unto the LORD for all his benefits toward me?

What shall I render unto the LORD for all his benefits toward me?

She fed her sawdust by mistake.

6.6.2.4.3 When additional protection against shell damage is provided, portable tanks with test pressures less than 2.65 bar, may have the minimum shell thickness reduced, in proportion to the protection provided, as approved by the competent authority.

He wouldn't look at my proposal.

Some people have flat feet.

Let me use the bin.