(i) managing stress,

This pressure should be lower than the test pressure of the tank involved.

by conditioned reflex under stress.

(iii) Pressure sensors, pressure activated mechanisms, should, where possible, be subject to a minimum pressure force appropriate for the intended target.

(iii) Pressure sensors shall, where possible, be subject to a minimum pressure force appropriate for the intended target.

A pressure test to the original test pressure shall be performed after the work is completed.

I also put in here the stress response.

But really, power is also about how you react to stress.

Don t Cripple the Tigers

TP16 The tank shall be fitted with a special device to prevent under pressure and excess pressure during normal transport conditions.

6.6.2.12.2.1 To determine the total required capacity of the relief devices, which shall be regarded as being the sum of the individual capacities of all the contributing devices, the following formula shall be used

OK. So there is the pressure sensitive display in operation.

It's pressure sensitive, you can notice.

(i) The pressure required to break the fiber optic signal shall be appropriate for the intended target.

I guess we all deal with stress in different ways.

6.6.2.8.5 When the shell is fitted for pressure discharge, the inlet line shall be provided with a suitable pressure relief device set to operate at a pressure not higher than the MAWP of the shell, and a stop valve shall be fitted as close to the shell as reasonably practicable.

Due attention shall be paid to the reduction of the relief capacity caused by the flame arrester.

Meanwhile international pressure on Myanmar should be maintained.

It's simply a matter of pressure and counterpressure.

Research is required not only to study biological vulnerability to increased levels of UV radiation but also other stress factors (i.e., integrated stress assessments).

That a witness protection programme be established to eliminate pressure on witnesses.

The pressure is recorded by a pressure transducer(s) capable of recording slow and fast (at least 1000 points sec.

Pressure

Prescale

Edit brush preset

Pressure?

This finds expression in resisting the pressure to conform to a changing society.

Larger developing countries may be better placed to manage these pressures.

The treaty bodies cannot, and nor should they seek to, remain immune to these pressures.

6.6.3.8.1.1 To determine the total required capacity of the relief devices, which shall be regarded as being the sum of the individual capacities of the several devices, the following formulae This formula applies only to non refrigerated liquefied gases which have critical temperatures well above the temperature at the accumulating condition.

16. Propellant elimination actions should also be designed to relieve high pressure gases employed in pressure fed propulsion systems.

Usually, the bursting pressure is set at a level that can cope with the pressures encountered during normal transport conditions such as hydrostatic pressure from the liquid due to turn over of the tank, slopping of the contents, etc.

6.6.2.2.10 A shell which is to be equipped with a vacuum relief device shall be designed to withstand, without permanent deformation, an external pressure of not less than 0.21 bar above the internal pressure.

A shell that is not to be fitted with a vacuum relief device shall be designed to withstand, without permanent deformation an external pressure of not less than 0.4 bar above the internal pressure.

Now, imagine a screen, which is not only touch sensitive now, it's pressure sensitive.

6.6.3.2.8 Shells shall be designed to withstand an external pressure of at least 0.4 bar gauge above the internal pressure without permanent deformation.

It should not be the result of pressure or nationalistic policies.

Forget the pressure.

Mouse pressure

Too much pressure on my nerves.

Pressure you ?

The bursting pressure of the disk fixed to the 10 l vessel should be equal to the maximum rupture pressure of the bursting disks to be fitted to the IBC or tank.

It would be wrong to see in these developments merely a response to external pressure.

Food should not be used as an instrument for political and economic pressure.

The pressure vessel should be in compliance with the requirements for the gas(es) contained in the pressure vessel.