(iv) Sufficient additional cushioning material is used to take up void spaces and to prevent significant movement of the inner packagings and

(b) Each valve shall be of the packless type with non perforated diaphragm, except that, for corrosive materials, a valve may be of the packed type with an assembly made gas tight by means of a seal cap with gasket joint attached to the valve body or the pressure receptacle to prevent loss of material through or past the packing

TP10 A lead lining, not less than 5 mm thick, which shall be tested annually, or another suitable lining material approved by the competent authority is required.

(c) Each valve outlet shall be sealed by a threaded cap or threaded solid plug and inert gasket material

So The hut was made of corrugated metal, set on a concrete pad.

So when one liners were really popular, everybody stole them from one another.

(f) linings, if any, are inspected in accordance with criteria outlined by the lining manufacturer

(b) plastics drums and jerricans that

Lining material (when applicable)

The certificate shall refer to the prototype test report, the substances or group of substances allowed to be transported, the materials of construction of the shell and lining (when applicable) and an approval number.

And when we go to COP15 at the end of this year we can't stop thinking of padding CO2.

But this one was made out of a nylon tag out of my shirt.

It is down cycled and turned into lesser things, while a glass bottle can be a glass bottle again or can be used again a plastic bottle can never be a plastic bottle again.

Plastik

At the end of this process, we have a mixed plastic composite many different types of plastics and many different grades of plastics.

It's a bad thing that plastic breaks down into smaller little bits, because it's always still plastic.

It's plastic pollution.

He's given a little bottle massage, a little bottle medal.

Whenever possible, refuse single use and disposable plastics.

Upon educating myself a little further about plastics, I actually realized this was a bad thing.

I'm also concerned about the plastic in the refrigerator, and I'm concerned about the plastic and the toxins that leach from plastic into us and into our bodies.

Moreover, most plastic products are made from so called petroleum based commodity thermoplastics. Given that a non renewable resource forms the basis of many plastic products most of which will not last long current plastics usage patterns are not sustainable.

Plastic just is not going to do it.

(b) plastics drums that

And if you really look into it, particularly when it comes to plastic bottles, most of it is only down cycled, or incinerated, or shipped to China.

It's not just that gyre of plastic that I'm concerned about it's the gyre of plastic in the supermarket.

Now because the plastics are so plentiful and by the way, those other methods don't lead to the recovery of plastics, obviously but people do try to recover the plastics.

And both in the production of plastic, the use of plastic and the disposal of plastic, the people who have the bull's eye on their foreheads are poor people.

It's a plastic bag.

The Dirt on Plastic Waste

And that was done with a particle from my shirt.

PP88 For UN 3473 when fuel cell cartridges are packed with equipment, they shall be packed in inner packagings or placed in the outer packaging with cushioning material so that the cartridges are protected against damage that may be caused by the movement or placement of the equipment and the cartridges within the outer packaging. .

It's mostly many types of plastics and many types of metals.

Plastics have taken the place of many conventional materials.

Recycling of plastic in many developing countries means the incineration of the plastic, the burning of the plastic, which releases incredible toxic chemicals and, once again, kills people.

And in the process, we started recreating how the plastics industry makes plastics.

6.6.4.2.8 Where used a liner shall be made of a suitable material.

Now look at that plastic chair.

51H flexible plastics large packagings

50H rigid plastics large packagings

Yeah, yeah, yeah. Soybeans, yeah.

glass, plastic, terry cloth.

I like drinking from a stein.

And the last material I'm going to talk about today is plastic, and, of course, my toaster had to have a plastic case.

I've been working with plastic bags, which I cut up and sew back together as my primary material for my artwork for the last 20 years.