6.6.2.2.14 The value of yield strength or proof strength shall be the value according to national or international material standards.

6.6.3.2.11 The values of yield strength or proof strength shall be the value according to national or international material standards.

6.6.4.2.14 The values of yield strength or proof strength shall be the values according to national or international material standards.

This value controls the degree of intensity attenuation by the filter at its point of maximum density.

When no material standard exists for the steel in question, the value of yield strength or proof strength used shall be approved by the competent authority.

When no material standard exists for the metal in question, the value of yield strength or proof strength used shall be approved by the competent authority.

India has a strong SMEs sector, which contributed about 50 per cent of industrial output and 42 per cent of India's overall exports.

This function transforms a radian angle to a degree angle.

This function transforms a degree angle to a radian angle.

Enhancement, in the educational systems of the region, of knowledge and appreciation of the history and cultural diversity of Ibero America

When no material standard exists for the metal in question, or when non metallic materials are used the values of yield strength or proof strength shall be approved by the competent authority.

length

maxLength

minLength

Brightness value

This value in degrees will be added to main angle value to set fine target angle.

This value in degrees will be added to main horizontal angle value to set fine adjustments.

This value in degrees will be added to main vertical angle value to set fine adjustments.

An angle in degrees by which to rotate the image. A positive angle rotates the image clockwise a negative angle rotates it counter clockwise.

Gray threshold

The strength of the spectral features can be used to increase the accuracy of the estimate of each supernova apos s intrinsic brightness and therefore, its distance.

Latitude value is invalid.

Longitude value is invalid.

Width is invalid

Height is invalid

Single Precision Number

Double Precision Number

Net Worth By Year

Contribution Estimated annual value

Alpha is the distribution of the sizes of attacks, which is really the distribution of the group strength carrying out the attacks.

When austenitic steels are used, the specified minimum values of yield strength or proof strength according to the material standards may be increased by up to 15 when these greater values are attested in the material inspection certificate.

When austenitic steels are used, the specified minimum values of yield strength and proof strength according to the material standards may be increased by up to 15 when greater values are attested in the material inspection certificate.

When austenitic steels are used, the specified minimum values according to the material standards may be increased by up to 15 when greater values are attested in the material inspection certificate.

Luminosity display the image's luminosity values.

The main horizontal shearing angle, in degrees.

The main vertical shearing angle, in degrees.

3.8.1.1 Amend the end of the paragraph to read as follows and or delayed and not specifically addressed in chapters 3.1 to 3.7 are included (see also 3.8.1.6). .

Minimal Value is a hard limit

a Unless otherwise noted, the estimated body wave magnitude is that published by the United States National Earthquake Information Center and is based on observations of magnitude obtained from around the world, including from Australia.

In choosing the material, the design temperature range shall be taken into account with respect to risk of brittle fracture, to stress corrosion cracking and to resistance to impact. When fine grain steel is used, the guaranteed value of the yield strength shall be not more than 460 N mm2 and the guaranteed value of the upper limit of the tensile strength shall be not more than 725 N mm2 according to the material specification.

In choosing the material the design temperature range shall be taken into account with respect to risk of brittle fracture, to stress corrosion cracking and to resistance to impact. When fine grain steel is used, the guaranteed value of the yield strength shall be not more than 460 N mm2 and the guaranteed value of the upper limit of the tensile strength shall be not more than 725 N mm2 according to the material specification.

On the subject of ethical values, the 161 federal public administration institutions that participate in the operational programmes for transparency and combating corruption (POTCC) are working on developing instruments for strengthening public servants' ethics and values.

This debt reduction, coupled with Canada's strong economic growth, has resulted in a significant decline in the federal debt to GDP (Gross Domestic Product) ratio, from its peak of 68.4 percent in 1995 1996 to an expected 38.8 percent in 2004 2005.

Set here the saturation value.

Lowpass filter width value