"次要刻度线"的翻译 使用英语:
字典 中国人-英语
次要刻度线 - 翻译 :
例子 (外部来源,未经审查)
刻度线长度 | Tic length |
刻度线宽度 | Tic width |
刻度线宽度 | Tic width |
刻度线长度 | Tic length |
输入刻度线长度 | Enter the length of the tic lines |
输入刻度线宽度 | Enter the width of the tic lines. |
可见的刻度线标签 | visible tic labels |
每个刻度绘制直线 | A line for every tic. |
总结下 如果光线角度正好 只反射一次 如果光线偏离轴线 那么将要反射两次 对极度偏离轴线的光线 将需要3次反射 | So for direct light, it takes only one bounce, for off axis light it might take two, and for extreme off axis, it might take three. |
选择新二次曲线的角度... | Select the focus of the new conic... |
次要总线编号 | Secondary bus number |
次要总线重置 | Secondary bus reset |
选择您想要构造准线的二次曲线... | Select the conic of which you want to construct the directrix... |
靠近次要总线的 CPU | Secondary bus towards host CPU |
选择您想要构建渐近线的二次曲线... | Select the conic of which you want to construct the asymptotes... |
印度对控制线的侵犯次数日益增加,程度日益严重 | The frequency and intensity of Indian violations of the Line of Control is increasing. |
鼓掌 另外一件事是它让1千万的人 头一次感受到了时刻在线的感觉 | Another thing was that it let 10 million people, for the first time, experience being online all the time. |
次要总线电源与时钟控制 | Secondary bus power clock control |
你需要把想要折叠的方式解码成 解码成一系列角度 负120度 负120度 0度 0度 120度 负120度 这类的东西 一系列角度 或转向 可以用电线把这个次序传过去 | You decode what you want to fold up into, into a sequence of angles so negative 120, negative 120, 0, 0, 120, negative 120 something like that so a sequence of angles, or turns, and you send that sequence through the string. |
此刻 纳粹军团已越过我方前线 | At this moment, Nazi troops are streaming across our frontiers. |
D3 hot 状态下的次要总线状态 | Secondary bus state in D3 hot |
厄立特里亚一直宣称并且再次重申时刻准备开始整个边境线的标界工作 | Eritrea's long stated readiness to proceed with demarcation over the whole length of the boundary has been reiterated. |
数据刻度 | Data scale |
刻度偏移 | Scale Offset |
时间刻度 | Scale |
对数刻度 | Logarithmic Scaling |
引线延长线长度 | Leader Line Extensions Length |
二次曲线的准线 | Directrix of a Conic |
二次曲线的准线 | The directrix line of a conic. |
二次曲线样条至少需要 3 个点 | Quadratic splines need at least 3 points. |
三次曲线样条至少需要 4 个点 | Cubic splines need at least 4 points. |
二次曲线样条至少需要 5 个点 | Quadratic splines need at least 5 points. |
三次曲线样条至少需要 6 个点 | Cubic splines need at least 6 points. |
二次曲线样条至少需要 4 个点 | Quadratic splines need at least 4 points. |
三次曲线样条至少需要 5 个点 | Cubic splines need at least 5 points. |
三次曲线样条至少需要 4 个点 | B splines need at least 4 points. |
选中此处代表要为数轴刻度显示标签 | Check this if the axes' tics should be labeled. |
此二次曲线的切线 | Tangent to This Conic |
此三次曲线的切线 | Tangent to This Cubic Curve |
刻度之间的宽度单位 | Width of a unit from tic to tic |
刻度之间的高度单位 | Height of a unit from tic to tic |
刻度之间的高度单位 | Enter the height of a unit from tic to tic. |
5分钟刻度 | 5 minute tick marks |
1分钟刻度 | Minute tick marks |
选择新的二次曲线所要通过的点... | Select a point for the new conic to go through... |
相关搜索 : 刻度线 - 刻度线 - 刻度线 - 刻度线 - 次要线 - 刻线 - 刻线 - 刻度 - 刻度 - 刻度 - 刻度 - 蚀刻线 - 速度刻度 - 角度刻度