Welds shall be skillfully made and afford complete safety.

Welds shall be skilfully made and afford complete safety.

Compressor Welding equipment

Oxygen gas welding kit

Heavy duty MIG welder Hydraulic trolley

They're slow in a partwelded hull.

For welded shells, only a material whose weldability has been fully demonstrated shall be used.

Welded pipe joints shall be used wherever possible.

For welded shells and jackets only materials whose weldability has been fully demonstrated shall be used.

Elsewhere pipe joints shall be welded when necessary.

You see a girl here who is trained as a welder.

Why welding and why not computers?

6.6.2.5.9 Joints in copper tubing shall be brazed or have an equally strong metal union.

6.6.3.5.11 Joints in copper tubing shall be brazed or have an equally strong metal union.

6.6.4.5.11 Joints in copper tubing shall be brazed or have an equally strong metal union.

In November 1994, NASA and the Paton Welding Institute in Kiev, Ukraine, initiated a joint project called the International Space Welding Experiment.

The materials shall in principle conform to national or international material standards. For welded shells only a material whose weldability has been fully demonstrated shall be used.

Regulations on permissible noise levels from arc welding equipment, No. 331 1994

Plate products are used for ship building, construction, large diameter welded pipes and boiler applications.

I'm in favor of particularly where the older technologies don't work well or have become unacceptable.

t engineering technology h hospitality management

She is an illiterate girl, trained, skilled as a welder.

It was made of 40 and 50 centimeter diameter steel pipes welded roughly together.

6.6.2.3.3.2 Steels which have a Re Rm ratio of more than 0.85 are not allowed for the construction of welded shells.

6.6.3.3.3.2 Steels which have a Re Rm ratio of more than 0.85 are not allowed for the construction of welded shells.

6.6.4.3.3.2 Steels which have a Re Rm ratio of more than 0.85 are not allowed for the construction of welded shells.

They're just going to blow apart.

Connections for such instruments shall be made by suitable welded nozzles or pockets and not be screwed connections through the shell.

And what you do is you put it together in three layers, you weld it around the edge, and then you inflate it.

They understood it, they embraced the technology and they run with it, and they re successful.

The list covers four broad areas of measurement basic ICT infrastructure and access, ICT access and use by households, ICT use by businesses and the ICT sector and trade in ICT goods.

Now, retro vaccinology is just one technique within the ambit of so called rational vaccine design.

Non earmarked Technical cooperation overheads or other sources

Every single year fewer electricians, fewer carpenters, fewer plumbers, fewer welders, fewer pipefitters, fewer steamfitters.

The creation of an enabling environment must be pursued at the national and international levels both by technology recipients and technology suppliers.

There are a number of techniques to harvest rain.

Lower rates of acceptance were seen for female trainees in industrial maintenance and soldering.

(b) Welder (1 post).

And this is a consequence of the fact that these new technologies tend to be digital.

Now we've heard a lot today about new technology and connection.

The reports indicated that few girls took up technical subjects or technical vocational training and that little was being done to steer them in those directions.

Technical guidance to assist in implementing new approaches will be provided through technical manuals, planning workshops and, where necessary, direct technical assistance.

Promotion of science and technology for development also requires a labour force that has the professional and technical training necessary to utilize newly introduced technologies.

This is a fairly technical error in which an error occurred while attempting to accept an incoming network connection.

It is also planned to include other skills such as carpentry, welding, upholstery and tailoring and dressmaking