Welded pipe joints shall be used wherever possible.

Elsewhere pipe joints shall be welded when necessary.

It was made of 40 and 50 centimeter diameter steel pipes welded roughly together.

Plate products are used for ship building, construction, large diameter welded pipes and boiler applications.

Compressor Welding equipment

6.6.2.5.9 Joints in copper tubing shall be brazed or have an equally strong metal union.

6.6.3.5.11 Joints in copper tubing shall be brazed or have an equally strong metal union.

6.6.4.5.11 Joints in copper tubing shall be brazed or have an equally strong metal union.

Oxygen gas welding kit

They're just going to blow apart.

Heavy duty MIG welder Hydraulic trolley

(b) Welder (1 post).

They're slow in a partwelded hull.

For welded shells, only a material whose weldability has been fully demonstrated shall be used.

For welded shells and jackets only materials whose weldability has been fully demonstrated shall be used.

What does he do weld 'em?

Metalwork basic metalwork, welding and soldering, ornamental wrought iron work, tool repair, machine maintenance and repair, tin work, etc.

The melting point of brazing materials shall be no lower than 525 C. The joints shall not decrease the strength of the tubing as may happen when cutting threads.

The melting point of brazing materials shall be no lower than 525 C. The joints shall not decrease the strength of tubing as may happen when cutting threads.

The melting point of brazing materials shall be no lower than 525 C. The joints shall not decrease the strength of the tubing as may happen by cutting of threads.

Every single year fewer electricians, fewer carpenters, fewer plumbers, fewer welders, fewer pipefitters, fewer steamfitters.

Now here, I'm going to do a very poor job of silver soldering.

Connections for such instruments shall be made by suitable welded nozzles or pockets and not be screwed connections through the shell.

Why welding and why not computers?

In November 1994, NASA and the Paton Welding Institute in Kiev, Ukraine, initiated a joint project called the International Space Welding Experiment.

The materials shall in principle conform to national or international material standards. For welded shells only a material whose weldability has been fully demonstrated shall be used.

Regulations on permissible noise levels from arc welding equipment, No. 331 1994

Welds shall be skillfully made and afford complete safety.

Welds shall be skilfully made and afford complete safety.

You see a girl here who is trained as a welder.

They were real soldering gun type guys, and they actually built this thing.

I mean, real jewelers put little bits of solder in.

This is not the way they teach you to silver solder when you're in school.

Have to use a acetylene torch to get him out.

To prevent leakage due to fire, only steel piping and welded joints shall be used between the jacket and the connection to the first closure of any outlet.

My life completely changed when I found a spot welder.

She is an illiterate girl, trained, skilled as a welder.

6.6.2.3.3.2 Steels which have a Re Rm ratio of more than 0.85 are not allowed for the construction of welded shells.

6.6.3.3.3.2 Steels which have a Re Rm ratio of more than 0.85 are not allowed for the construction of welded shells.

6.6.4.3.3.2 Steels which have a Re Rm ratio of more than 0.85 are not allowed for the construction of welded shells.

And what you do is you put it together in three layers, you weld it around the edge, and then you inflate it.

When an existing opening is closed it shall be accomplished by internally and externally welding one plate to the shell.

It is also a leading regional supplier of welded steel pipes for gas pipelines in South America, with overseas manufacturing facilities in Brazil, Canada, Italy, Japan, Mexico, Romania and Venezuela.

Lower rates of acceptance were seen for female trainees in industrial maintenance and soldering.

6.6.2.19.10 In all cases when cutting, burning or welding operations on the shell have been effected, that work shall be to the approval of the competent authority or its authorized body taking into account the pressure vessel code used for the construction of the shell.