(b) be jacketed with a material having a melting point of 700 C or greater.

6.6.2.2.5 Joints and seams in the lining shall be made by fusing the material together or by other equally effective means.

(including molten metals, molten salts, etc.) .

In particular, fusing was carried out at the Gallar facility to obtain a semiconductor material with improved properties.

The money received from selling this melted down material has gone into a foundation to help those injured by firearms.

Computes the melting temperature for a nucleic acid duplex.

The insulation shall remain effective at all temperatures less than 649 C and shall be jacketed with a material with a melting point of not less than 700 C. Portable tank materials shall be suitable for the external environment in which they may be transported.

Now, melting point has a lot to do with this.

And then we realized our probe was made out of the same stuff it could have melted. But it turns out the exiting temperature was 650 degrees F, hot enough to melt lead.

The melting point of brazing materials shall be no lower than 525 C. The joints shall not decrease the strength of the tubing as may happen when cutting threads.

The melting point of brazing materials shall be no lower than 525 C. The joints shall not decrease the strength of tubing as may happen when cutting threads.

The melting point of brazing materials shall be no lower than 525 C. The joints shall not decrease the strength of the tubing as may happen by cutting of threads.

Shell material(s) and material standard reference(s)

Incoming materials Feeds Interviews

In this way the material can be assessed from different angles i.e. from a criminal, fiscal and financial regulatory angle.

The international hazardous material code, which lists 350 materials considered as hazardous

Security of radioactive material other than nuclear material

The materials shall in principle conform to national or international material standards.

(vi) Technical material

(iv) Technical material

(iii) Technical material

(v) Technical material

Training material

Guidance material

aerospace materials

Audio visual Carpentry

Packing materials

Nanostructured materials

Composite materials

Smart materials

Electronic materials

Plastic is not purified by the re melting process like glass and metal.

(iv) Development of online materials and resources

The quality assurance programme should include a record of proper pre sorting and verification that each batch or recycled plastics material has the proper melt flow rate, density, and tensile yield strength, consistent with that of the design type manufactured from such recycled material.

UN 3268 Amend the name in column (a2) to read AIR BAG INFLATORS pyrotechnic or AIR BAG MODULES pyrotechnic or SEAT BELT PRETENSIONERS pyrotechnic .

New materials such as fused silica glass, ultra low expansion titanium silicate, and glass ceramic, to name a few, as well as application of advanced glass coating techniques, could improve dramatically the capability and reliability of remote sensing instruments.

If we can invent materials, design materials, or extract materials from a natural environment, then we might be able to have those materials induce the body to heal itself.

A metamaterial is an artificial material, which manipulates, in this case, electromagnetic radiation, in a way that you couldn't otherwise.

It begins to melt below the boiling point of water and does not drive off the oily contaminants for which it is a sponge.

The Code adds the materials not included in the Convention on the Physical Protection of Nuclear Material.

TP22 Lubricant for joints or other devices shall be oxygen compatible.

(d) Technical material

Fissile material

(g) Material properties.

D. Technical material