Her blood pressure was an alarming 230 over 170.

(d) the lowest set pressure of the pressure limiting device(s).

There's a transformer too... Just turn this thing here... and iron.

The compression value for the target images

Electricity 230 Volts, 50 Hertz

The compression value for JPEG target images

The compression value for PNG target images

I thought, if I increase the electrical charge...

(ii) The end of life of electrical batteries and cells must not be accompanied by a critical rise in pressure

The new compression value of JPEG images to be sent

Circuit Horizontal Zener Diode

Circuit Vertical Zener Diode

Nothing but you and a flock of high tension wires.

Design pressure means the pressure to be used in calculations required by a recognized pressure vessel code.

The second type is the piezoelectric biosensor.

If you lean forward, there's the high voltage.

Voltage peak in fibers causes changes of current circuit and crystal vibration, so that ultrasonic receiver (which currently is still the source that sends ultrasonic vibration) can detect echo.

The start to discharge pressure of the emergency relief device(s) shall be higher than that specified in 4.2.1.13.7 and based on the results of the tests referred to in 4.2.1.13.1.

Down converter, 24 to 12 VDC

That movie is worth seeing.

(b) the maximum effective gauge pressure to which the shell is designed, which shall be

The situation is worse when the fuzes are piezoelectrically activated.

Think it 's worth the chair?

Instead of using electrical motors, electromechanical actuators, we're using compressed air.

gas pressure bottles, and

What do we do about the high voltage?

When the high voltage is turned off, the alarm sounds.

As soon as I've cut the power, I'll come here.

This makes sense only for systems that are larger than a kilowatt of peak power and that have sufficient battery capacity. Local systems in one building could be connected to local low voltage DC or 230V AC grids to improve the security of supply.

This entry applies to fuel cell cartridge design types shown without their packaging to pass an internal pressure test at a pressure of 100 kPa (gauge).

At 10 20 the Brit has to check the power's off.

So there was 240 volts going through these homemade copper wires, homemade plug.

b Total value includes both high value and low value items for example, prefabricated containers and related accessories, and generators and generator accessories and spare parts.

Only a few TV programs are worth watching.

The right hand chart show the total value of the telecommunications market.

Smart material types include piezoelectric polymers, conductive polymers, piezoelectric and electrostrictive ceramics, electrorheological fluids, magnetorheological fluids, electrochromic coatings, magnetostrictive materials, micromachined integrated devices, and biomimetic polymers and gels, shape memory alloys and polymers.

The electricity subsector was severely affected by Hurricane Luis, with damage to poles, lines, transformers and other equipment.

I took the service at midnight and I don't remember receive any calling.

75. Piezoelectrics, electromechanical materials that respond to the applied electric current by changing dimensions, occupy the largest share of the smart material market.

Applications primarily in consumer products such as timing devices, video camera autofocus units and computer hard disk head positioners have helped piezoelectrics grow to almost a 1 billion industry.

The equipment ordered included 14 Danish Sabroe refrigeration compressors, valued at 339,389.

Z the gas compressibility factor in the accumulating condition (when this factor is unknown, let Z equal 1.0)

The vacuum relief device shall be set to relieve at a vacuum setting not greater than minus ( ) 0.21 bar unless the shell is designed for a higher external over pressure, in which case the vacuum relief pressure of the device to be fitted shall be not greater than the tank design vacuum pressure.

When the pressure test is a part of the inspection and test, the test pressure shall be the one indicated on the data plate of the portable tank.

He'll call on you in the morning when he makes his rounds.