Connections for such instruments shall be made by suitable welded nozzles or pockets and not be screwed connections through the shell.

(d) missing or loose bolts or nuts on any flanged connection or blank flange are replaced or tightened

You can do gears and nuts and bolts that you can buy at Whole Foods.

Inverter, rachet keys, bolt cutters and blades

(b) a liquid tight closure at the end of the discharge pipe, which may be a bolted blank flange or a screw cap.

(c) a liquid tight closure at the end of the discharge pipe, which may be a bolted blank flange or a screw cap.

Compressor Welding equipment

Oxygen gas welding kit

(c) Future number of mission related objects (fairing, bolts etc.)

The melting point of brazing materials shall be no lower than 525 C. The joints shall not decrease the strength of the tubing as may happen when cutting threads.

The melting point of brazing materials shall be no lower than 525 C. The joints shall not decrease the strength of tubing as may happen when cutting threads.

The melting point of brazing materials shall be no lower than 525 C. The joints shall not decrease the strength of the tubing as may happen by cutting of threads.

Sometimes, all it is is a misplaced air scoop or maybe a loose bolt in the elevator hinge or... once in a blue moon, a pilot with a psychosis.

Heavy duty MIG welder Hydraulic trolley

They're slow in a partwelded hull.

For welded shells, only a material whose weldability has been fully demonstrated shall be used.

Welded pipe joints shall be used wherever possible.

For welded shells and jackets only materials whose weldability has been fully demonstrated shall be used.

For example, clamp bands and sensor covers should be retained by parent bodies, and all fragments of explosive bolts should be captured.

Elsewhere pipe joints shall be welded when necessary.

You see a girl here who is trained as a welder.

Why welding and why not computers?

6.6.2.5.9 Joints in copper tubing shall be brazed or have an equally strong metal union.

6.6.3.5.11 Joints in copper tubing shall be brazed or have an equally strong metal union.

6.6.4.5.11 Joints in copper tubing shall be brazed or have an equally strong metal union.

In November 1994, NASA and the Paton Welding Institute in Kiev, Ukraine, initiated a joint project called the International Space Welding Experiment.

The materials shall in principle conform to national or international material standards. For welded shells only a material whose weldability has been fully demonstrated shall be used.

Regulations on permissible noise levels from arc welding equipment, No. 331 1994

Plate products are used for ship building, construction, large diameter welded pipes and boiler applications.

It was an embolism.

I have done.

(iii) Payload separation systems and multiple launching structures must not generate any debris (sealed pyrotechnic separation and trapping of explosive bolts and of straps)

She is an illiterate girl, trained, skilled as a welder.

It was made of 40 and 50 centimeter diameter steel pipes welded roughly together.

6.6.2.3.3.2 Steels which have a Re Rm ratio of more than 0.85 are not allowed for the construction of welded shells.

6.6.3.3.3.2 Steels which have a Re Rm ratio of more than 0.85 are not allowed for the construction of welded shells.

6.6.4.3.3.2 Steels which have a Re Rm ratio of more than 0.85 are not allowed for the construction of welded shells.

They're just going to blow apart.

Bring your horse right in.

And what you do is you put it together in three layers, you weld it around the edge, and then you inflate it.

What's to keep you?

You're tied to me.

Hear that, solly? You keep those dogs on leash.

Lower rates of acceptance were seen for female trainees in industrial maintenance and soldering.

(b) Welder (1 post).