"螺纹刀具"的翻译 使用英语:
字典 中国人-英语
例子 (外部来源，未经审查)
| (c) 每个阀门出口必须用螺纹帽或螺纹实心塞和惰性衬垫材料密封 | (c) Each valve outlet shall be sealed by a threaded cap or threaded solid plug and inert gasket material |
| 別忘記拿螺絲刀 | Don't forget the screwdriver. |
| 你能递给我螺丝刀吗 | Can you give me the screwdriver? |
| (c) 如果有腐蚀迹象或者配件已拆掉 检查螺纹 | (c) Check of the threads if there is evidence of corrosion or if the fittings are removed |
| 换流器 棘轮钥匙螺栓切割器和刀片 | Inverter, rachet keys, bolt cutters and blades |
| AcoustID 音乐指纹工具 | Acoustid Music fingerprinting tool |
| 他们把螺纹钢正确的绑在一起 正确的浇筑柱子 这样的建筑就安全了 | They tied the rebar right, they poured the columns right, and that building will be safe. |
| 我想提取一下这具躯体的指纹 | I want to take the corpse's fingerprints. |
| 装货和卸货装置(包括盖板或螺纹塞)及任何防护帽应能防止发生无意被打开的情况 | The filling and discharge devices (including flanges or threaded plugs) and any protective caps shall be capable of being secured against unintended opening. |
| 可以当铲子用 可以当撬子用 可以当成螺丝起子 也可以用作小刀 | You know, it's a spatula, it's a pry bar, it's a screwdriver and it's a blade. |
| 这是我第一个透视图 可以看见所有这些小零件 还有这些小螺纹转动杆和所有这些东西 | There's my first exploded view and all the little pieces and the little worm drive and all that stuff. |
| 铜焊材料的熔点不应低于525 接头不应降低管道的强度 而车制螺纹就可能降低管道强度 | The melting point of brazing materials shall be no lower than 525 C. The joints shall not decrease the strength of the tubing as may happen when cutting threads. |
| 铜焊材料的熔点不应低于525 接头不应降低管道的强度 而车制螺纹就可能降低管道强度 | The melting point of brazing materials shall be no lower than 525 C. The joints shall not decrease the strength of tubing as may happen when cutting threads. |
| 铜焊材料的熔点不应低于525 接头不应降低管道的强度 而车制螺纹就可能降低管道强度 | The melting point of brazing materials shall be no lower than 525 C. The joints shall not decrease the strength of the tubing as may happen by cutting of threads. |
| 他的马刀是他的玩具 | His saber was a toy. |
| 螺絲釘 我才不在乎螺絲釘 | To hell with the screw! |
| 里面有一个螺旋器. 什么是螺旋器? | There's a gyroscope in it. |
| 螺旋 | Helix |
| 螺旋 | The Spiral |
| 螺旋 | Spiral |
| 田螺? | Winkles? |
| 小刀是一个强大的万能工具 | And it's a it's a powerful and empowering tool. |
| 问题的根源是相同的 墙和楼板之间没有用柱子正确的连接起来 这是挂在建筑上的天台楼板 悬臂式结构 或是非对称结构 剧烈摇晃并垮塌 低劣的建筑材料 没有足够的混凝土 块与块之间没有足够的压缩空间 螺纹钢表面光滑 螺纹钢暴露在空气中并已经生锈了 | The failure points were the same walls and slabs not tied properly into columns that's a roof slab hanging off the building cantilevered structures, or structures that were asymmetric, that shook violently and came down, poor building materials, not enough concrete, not enough compression in the blocks, rebar that was smooth, rebar that was exposed to the weather and had rusted away. |
| 螺旋1 | Spiral1 |
| 螺旋1 | Spiral2 |
| 螺旋数 | Complex number |
| 螺旋数 | Spiral number |
| 螺旋Name | Helix |
| 螺旋Name | Spiral |
| 螺丝钉 | Screw |
| 方螺旋 | Squiral |
| 是螺锥 | Corkscrew! |
| 螺旋钳? | Monkey wrench? Oh. |
| 从食物保障的角度来看 螺旋藻十分重要 具有显著的经济效益 | Spirulina was important in terms of food safety, and had a tangible economic impact. |
| 黄金螺线 | Golden spiral |
| 方螺旋Name | Squiral |
| 死亡螺旋 | Toxic spirals |
| 螺旋线 2 | Helix 2 |
| 螺旋线 3 | Helix 3 |
| 螺旋线 4 | Helix 4 |
| 螺旋方向 | Handedness |
| 螺旋形状 | Spiral Shape |
| 更改螺旋 | Change spiral |
| 螺旋形状 | A spiral shape |
| (a) 每个塞或阀门必须有直接与压力贮器相连的锥形螺纹接头 并且必须能够承受压力贮器的试验压力而不损坏或泄漏 | (a) Each plug or valve shall have a taper threaded connection directly to the pressure receptacle and be capable of withstanding the test pressure of the pressure receptacle without damage or leakage |
相关搜索 : 螺纹梳刀 - 螺纹铣刀 - 螺纹刀片 - 螺纹退刀槽 - 盲目螺纹刀片 - 螺纹 - 螺纹 - 螺纹 - 螺纹 - 刀具 - 刀具 - 螺母螺纹 - 螺纹螺钉
