(c) Each valve outlet shall be sealed by a threaded cap or threaded solid plug and inert gasket material

(c) Check of the threads if there is evidence of corrosion or if the fittings are removed

All stop valves with screwed spindles shall close by a clockwise motion of the handwheel.

All stop valves with a screwed spindle shall be closed by a clockwise motion of the handwheel.

They tied the rebar right, they poured the columns right, and that building will be safe.

The filling and discharge devices (including flanges or threaded plugs) and any protective caps shall be capable of being secured against unintended opening.

There's my first exploded view and all the little pieces and the little worm drive and all that stuff.

The melting point of brazing materials shall be no lower than 525 C. The joints shall not decrease the strength of the tubing as may happen when cutting threads.

The melting point of brazing materials shall be no lower than 525 C. The joints shall not decrease the strength of tubing as may happen when cutting threads.

The melting point of brazing materials shall be no lower than 525 C. The joints shall not decrease the strength of the tubing as may happen by cutting of threads.

It's full of all kinds of gyroscopes and pulleys and gadgets and ball bearings, and they don't work as well as they ought to in the heat of battle.

And that four dimensional space consists of X, Y, Z and then the yaw angle.

To hell with the screw!

There's a gyroscope in it.

Helix

The Spiral

Spiral

Winkles?

The failure points were the same walls and slabs not tied properly into columns that's a roof slab hanging off the building cantilevered structures, or structures that were asymmetric, that shook violently and came down, poor building materials, not enough concrete, not enough compression in the blocks, rebar that was smooth, rebar that was exposed to the weather and had rusted away.

I can reflect it in the line through X, or the line through Y, or the line through Z.

Spiral1

Spiral2

Complex number

Spiral number

Helix

Spiral

Screw

Squiral

Corkscrew!

Monkey wrench? Oh.

Axes

Axis

Golden spiral

Squiral

Toxic spirals

Helix 2

Helix 3

Helix 4

Handedness

Spiral Shape

Change spiral

A spiral shape

(a) Each plug or valve shall have a taper threaded connection directly to the pressure receptacle and be capable of withstanding the test pressure of the pressure receptacle without damage or leakage

Radius this control selects the gliding window size used for the filter. Larger values do not increase the amount of time needed to filter each pixel in the image but can cause blurring. This window moves across the image, and the color in it is smoothed to remove imperfections. In any case it must be about the same size as the noise granularity or somewhat more. If it is set higher than necessary, then it can cause unwanted blur.

File name