Gears

Gear size

Gearhead

A gearhead

A tiny cog in the great wheel of evolution.

Cube Gears

Gear in.

So, that's a finished gear.

Roads, cones and wheels.

In the middle we have a motor, and we also have a gear in it, and we use the gear to transfer the circulation of the motor.

Stop complaining and bring the gear over here.

Let's put the gear here.

The behaviour of the planet's axis on mouse dragging.

Display gears inside the cube

Every one of these circles is a cog, a stack of cogs, and this thing is as big as a steam locomotive.

Sorry, the gears look all alike.

And the gears work in water as well.

You're the most adorable cog I've ever seen.

That little gear there switches back and forth to change direction.

He's merely a grain of sand in the wheels of our machine!

So that rod, connected to the gearshift lever on the steering post, comes down here

It will be finally put into geostationary orbit at 140o E. The MTSAT is a three axis stabilized satellite.

So let's talk about the memory. The memory is very like the memory of a computer today, except it was all made out of metal, stacks and stacks of cogs, 30 cogs high.

So, we have a motor here on the left, and it goes through a gear train.

ES Well, imagine that you have two gears of a watch, a big one and a small one.

Clean it up, Chief, and nail down the new gear.

And they can pinch them very tight and stop it, or you can have them wide open.

You can do gears and nuts and bolts that you can buy at Whole Foods.

Clutch in, move gear, pedal down, clutch out, now all together.

(all) Clutch in, move gear, pedal down, clutch out.

TS Yes, they're servos with cams that pinch these rubber tubes.

Think of the satisfaction of being a small cog in the great wheel of humanity known as Lonesome Rhodes.

After many years of bending gears with a pair of pliers, I made that tool, and then I made this other tool for sort of centering gears very quickly sort of developing my own little world of technology.

All stop valves with screwed spindles shall close by a clockwise motion of the handwheel.

All stop valves with a screwed spindle shall be closed by a clockwise motion of the handwheel.

The axis of a wheel is staying on the same level, and this hip is staying on the same level as well.

So starting from a three dimensional ping sound system, a vibrating vest, a click wheel with voice commands, a leg strip, even a shoe that applies pressure to the foot.

Yes. As the teeth go, so go the bones.

SFU is an unmanned, reusable, sun pointing, three axis stabilized satellite.

For example, in this case, even though the left and right wheel is connected with a single axle rotating at the same angle of velocity.

And that four dimensional space consists of X, Y, Z and then the yaw angle.

You have to keep your teeth sharp, all right.

SFU is an unmanned, re usable, sun pointing, 3 axis stabilized satellite, and constitutes the first of its kind built by Japan.

Its design, featuring three axis stabilization, permits the satellite apos s sensors to observe the Earth continuously, compared to only 5 percent of the time for current spin stabilized satellites.

THAICOM 3 is a three axis stabilized satellite spacecraft with a payload of 24 C Band and 14 Ku Band transponders.