Thickness

6.6.4.4.4 For vacuum insulated tanks, the aggregate thickness of the jacket and the shell shall correspond to the minimum thickness prescribed in 6.6.4.4.2, the thickness of the shell itself being not less than the minimum thickness prescribed in 6.6.4.4.3.

L thickness of insulation layer m

L thickness of insulation layer m

6.6.2.4 Minimum shell thickness

6.6.3.4 Minimum shell thickness

6.6.4.4 Minimum shell thickness

This thickness shall be exclusive of any corrosion allowance.

6.6.3.4.4 The equivalent thickness of a steel other than the thickness prescribed for the reference steel in 6.6.3.4.2 shall be determined using the following formula

6.6.2.4.6 The equivalent thickness of a metal other than the thickness prescribed for the reference steel in 6.6.2.4.3 shall be determined using the following equation

The thickness of aluminium liner is 2.1 mm.

Equivalent thickness in reference steel _ mm

Stamp of expert who performed or witnessed the most recent test _

(b) the minimum thickness determined in accordance with the recognized pressure vessel code including the requirements in 6.6.3.3.

(b) the minimum thickness determined in accordance with the recognized pressure vessel code including the requirements in 6.6.4.3.

(ii) is approximately of the same size and mass as the existing equipment and

Shells of more than 1.80 m in diameter shall be not less than 6 mm thick in the reference steel or of equivalent thickness in the steel to be used.

6.6.4.4.6 The equivalent thickness of a metal other than the thickness prescribed for the reference steel in 6.6.4.4.2 and 6.6.4.4.3 shall be determined using the following equation

Who do you think you are,

Shells of more than 1.80 m in diameter shall be not less than 6 mm thick in the reference steel or of equivalent thickness in the metal to be used.

Shells more than 1.80 m in diameter shall be not less than 4 mm thick in the reference steel or of equivalent thickness in the metal to be used.

6.6.4.4.2 Shells of not more than 1.80 m in diameter shall be not less than 5 mm thick in the reference steel or of equivalent thickness in the metal to be used.

Such shells of more than 1.80 m in diameter shall be not less than 4 mm thick in the reference steel or of equivalent thickness in the metal to be used.

(b) the minimum thickness determined in accordance with the recognized pressure vessel code including the requirements in 6.6.2.3 and

Shells more than 1.80 m in diameter shall be not less than 6 mm thick in the reference steel or of equivalent thickness in the metal to be used, except that for powdered or granular solid substances of Packing Group II or III the minimum thickness requirement may be reduced to not less than 5 mm thick in the reference steel or of equivalent thickness in the metal to be used.

You forget your place as an outcastl

It's created depositing layers of about four microns.

Minimum shell thickness (mm reference steel) Bottom opening requir ements

(a) the minimum thickness determined in accordance with the requirements in 6.6.3.4 and

thickness (mm reference steel)

6.6.4.4.3 Shells of vacuum insulated tanks of not more than 1.80 m in diameter shall be not less than 3 mm thick in the reference steel or of equivalent thickness in the metal to be used.

e1 required equivalent thickness (in mm) of the steel to be used

And it was kept hot by a thick carbon dioxide atmosphere.

As the heavens for height, and the earth for depth, so the hearts of kings are unsearchable.

As the heavens for height, and the earth for depth, so the hearts of kings are unsearchable.

The heaven for height, and the earth for depth, and the heart of kings is unsearchable.

The heaven for height, and the earth for depth, and the heart of kings is unsearchable.

I'm impressed with the civilian background... of my medical officers.

(a) the minimum thickness determined in accordance with the requirements of 6.6.2.4.2 to 6.6.2.4.10

e1 required equivalent thickness (in mm) of the metal to be used

eo minimum thickness (in mm) for the reference steel specified in 6.6.3.4.2

(a) the minimum thickness determined in accordance with the requirements in 6.6.4.4.2 to 6.6.4.4.7 and

6.6.2.4.3 When additional protection against shell damage is provided, portable tanks with test pressures less than 2.65 bar, may have the minimum shell thickness reduced, in proportion to the protection provided, as approved by the competent authority.

6.6.2.4.2 The cylindrical portions, ends (heads) and manhole covers of shells not more than 1.80 m in diameter shall be not less than 5 mm thick in the reference steel or of equivalent thickness in the metal to be used.

6.6.3.4.2 The cylindrical portions, ends (heads) and manhole covers of shells of not more than 1.80 m in diameter shall be not less than 5 mm thick in the reference steel or of equivalent thickness in the steel to be used.