in which df and dr are the densities of the liquid at the mean temperature of the liquid during filling and the maximum mean bulk temperature during transport respectively.

First analysis showed detections of underdense and overdense ionized meteoroid trails.

6.6.4.4.4 For vacuum insulated tanks, the aggregate thickness of the jacket and the shell shall correspond to the minimum thickness prescribed in 6.6.4.4.2, the thickness of the shell itself being not less than the minimum thickness prescribed in 6.6.4.4.3.

Such procedures, in general, would be most effective in limiting the density of objects in those altitude bands that are most highly populated at present.

It was deeply classified.

They're actually singing these densities to you with higher pitches mapped to higher densities.

More precise calculation of the spatial density and flux of space objects at altitudes of up to 500 km

The next category is scattered fibroglandular densities, followed by heterogeneously dense and extremely dense.

Attention is drawn to the minimum shell thickness requirements for these shells specified in 6.6.3.4.

Medium concentrations in or offshore of Pinellas County have been reported in the past week, low to high concentrations offshore of Hillsborough County, background to high concentrations in Manatee County, background to high concentrations in or offshore of Sarasota County, background to medium concentrations in Charlotte County, background to high concentrations in or offshore of Lee County, and low concentrations in Collier County.

6.6.2.4 Minimum shell thickness

6.6.3.4 Minimum shell thickness

6.6.4.4 Minimum shell thickness

And although breast density generally declines with age, up to a third of women retain dense breast tissue for years after menopause.

Attention is drawn to the minimum shell thickness requirements for these tanks specified in 6.6.2.4.1 to 6.6.2.4.10.

6.6.2.2.11 Vacuum relief devices used on portable tanks intended for the transport of substances meeting the flash point criteria of Class 3, including elevated temperature substances transported at or above their flash point, shall prevent the immediate passage of flame into the shell, or the portable tank shall have a shell capable of withstanding, without leakage an internal explosion resulting from the passage of flame into the shell.

And breasts that fall into these two categories are considered dense.

In some countries the population density is quite high.

41.3.7 Alternate test severity validation method for portable tanks with frame length of 20 feet

When for reasons of portable tank arrangements the plate cannot be permanently attached to the shell, the shell shall be marked with at least the information required by the pressure vessel code.

When for reasons of portable tank arrangements, the plate cannot be permanently attached to the shell, the shell shall be marked with at least the information required by the pressure vessel code.

Font weight

This is classified far above his level.

Stratospheric and other broadband systems could be differentiated as high density and low density market segments.

The four rockets to measure plasma densities, both absolute and with high resolution, were flown on two key days, one each near local noon, the other at midnight.

The highest concentrations are in red.

It's also older women with dense tissue.

Minimum shell thickness (mm reference steel) Bottom opening requir ements

thickness (mm reference steel)

The principal risk factors are the spatial density and average relative collisional velocity along the orbit (altitude and inclination) of the space object of interest, the cross sectional area of the space object and the duration of the flight.

And what you're seeing here is a cloud of densely packed, hydrogen sulfide rich water coming out of a volcanic axis on the sea floor.

(b) Where the substances to be transported have a relative density exceeding 1.2, the drop heights shall be calculated on the basis of the relative density (d) of the substance to be transported rounded up to the first decimal as follows

Pressure vessel code to which the shell is designed

Likewise, you can go over your lipids and, again, understand what your overall cholesterol level is and then break down into the HDL and the LDL if you so choose.

In addition, most of these constellations will operate at an altitude of 700 1,400 km, which is even now the area of highest object density.

Higher fuel use intensity implies lower energy efficiency

Minimum design temperature means the temperature which is used for the design and construction of the shell not higher than the lowest (coldest) temperature (service temperature) of the contents during normal conditions of filling, discharge and transport.

A separating funnel can be used to separate a mixture of fluids of differing densities. A valve at the bottom allows the denser fluid to be drained for transfer to another container.

Instead, they are lifted to a graveyard orbit slightly above GEO, in order to at least reduce the object density and, thus, the collision risk within the highly frequented geostationary ring itself.

Now it's bad enough that breast density makes it hard to find a cancer, but it turns out that it's also a powerful predictor of your risk for breast cancer.

(i) Measures to recycle materials and to reduce the use of materials with high energy and carbon intensity on a life cycle analysis basis.

In the past, the universe was more dense, and it was also hotter.

Design temperature range for the shell shall be 40 C to 50 C for non refrigerated liquefied gases transported under ambient conditions.

Table 1 Some facility based verification techniques

For flammable non refrigerated liquefied gases, the escaping vapour shall be directed away from the shell in such a manner that it cannot impinge upon the shell.