Current schedule unlimited upload and download

No Depth Limit

Ad infinitum, if you wish.

Thickness

Brass ahoy.

6.6.4.4.4 For vacuum insulated tanks, the aggregate thickness of the jacket and the shell shall correspond to the minimum thickness prescribed in 6.6.4.4.2, the thickness of the shell itself being not less than the minimum thickness prescribed in 6.6.4.4.3.

What an assurance!

6.6.3.4.5 In no case shall the wall thickness be less than that prescribed in 6.6.3.4.1 to 6.6.3.4.3.

6.6.4.4.7 In no case shall the wall thickness be less than that prescribed in 6.6.4.4.1 to 6.6.3.4.5.

What drugstore?

6.6.2.4.8 In no case shall the wall thickness be less than that prescribed in 6.6.2.4.2, 6.6.2.4.3 and 6.6.2.4.4.

Confounded impudence.

Oh, the appearance of him.

You old rake! You deceiver! You rascal!

Well, this beats all world's records for running, jumping or standing gall.

Cheeky young beggar!

L thickness of insulation layer m

L thickness of insulation layer m

6.6.2.4 Minimum shell thickness

6.6.3.4 Minimum shell thickness

6.6.4.4 Minimum shell thickness

Depth of recursive search, 1 is unlimited

You impudent, ungrateful brute!

Your vassals are cheeky.

So brazen.

This thickness shall be exclusive of any corrosion allowance.

6.6.3.4.4 The equivalent thickness of a steel other than the thickness prescribed for the reference steel in 6.6.3.4.2 shall be determined using the following formula

6.6.2.4.6 The equivalent thickness of a metal other than the thickness prescribed for the reference steel in 6.6.2.4.3 shall be determined using the following equation

They're rather full of themselves, I have to say.

Indeed, he's even gone so far as to propose marriage to me.

The thickness of aluminium liner is 2.1 mm.

Equivalent thickness in reference steel _ mm

Stamp of expert who performed or witnessed the most recent test _

(ii) is approximately of the same size and mass as the existing equipment and

Shells of more than 1.80 m in diameter shall be not less than 6 mm thick in the reference steel or of equivalent thickness in the steel to be used.

6.6.4.4.6 The equivalent thickness of a metal other than the thickness prescribed for the reference steel in 6.6.4.4.2 and 6.6.4.4.3 shall be determined using the following equation

Shells of more than 1.80 m in diameter shall be not less than 6 mm thick in the reference steel or of equivalent thickness in the metal to be used.

I am amazed at your audacity.

Such impudence never came my way.

Go on, apologize.

Shells more than 1.80 m in diameter shall be not less than 4 mm thick in the reference steel or of equivalent thickness in the metal to be used.

6.6.4.4.2 Shells of not more than 1.80 m in diameter shall be not less than 5 mm thick in the reference steel or of equivalent thickness in the metal to be used.

Such shells of more than 1.80 m in diameter shall be not less than 4 mm thick in the reference steel or of equivalent thickness in the metal to be used.

Shells more than 1.80 m in diameter shall be not less than 6 mm thick in the reference steel or of equivalent thickness in the metal to be used, except that for powdered or granular solid substances of Packing Group II or III the minimum thickness requirement may be reduced to not less than 5 mm thick in the reference steel or of equivalent thickness in the metal to be used.

It is true that he is poor, but he is contented.