4.2.1.9.5.1 The maximum degree of filling (in ) for liquids transported under elevated temperature conditions is determined by the formula

Name of the refrigerated liquefied gas being transported (and minimum mean bulk temperature)

TP3 For liquids transported under elevated temperature conditions the filling limits prescribed in 4.2.1.9.5.1 shall be met.

A separating funnel can be used to separate a mixture of fluids of differing densities. A valve at the bottom allows the denser fluid to be drained for transfer to another container.

For solids and liquids, if the test is performed with the solid or liquid to be transported or with another substance having essentially the same physical characteristics

Name of non refrigerated liquefied gas(es) permitted for transport

in which df and dr are the densities of the liquid at the mean temperature of the liquid during filling and the maximum mean bulk temperature during transport respectively.

Six hundred degree F water coming out of the Earth.

You're allowing fluid or air to go through at steady states.

282 Suspensions with a flash point of not more than 60.5 C should bear a flammable liquid subsidiary risk label.

the partial pressure (in bar) of air or other gases in the ullage space being determined by the design reference temperature and the liquid phase expansion due to the increase of the mean bulk temperature of tr tf (tf filling temperature, usually 15 C, tr 50 C maximum mean bulk temperature).

4.2.1.9.4 In these formulae, α is the mean coefficient of cubical expansion of the liquid between the mean temperature of the liquid during filling (tf) and the maximum mean bulk temperature during transport (tr) (both in C).

And what you're seeing here is a cloud of densely packed, hydrogen sulfide rich water coming out of a volcanic axis on the sea floor.

Burets are used to titrate liquids. A buret is filled with a specific volume of a liquid, and placed beneath it is a container such as an Erlenmeyer flask. By opening the valve on the buret, the liquid in the container will then be titrated. High quality burets have a venting mechanism with which they can be very easily refilled with the exact volume for which the buret is calibrated.

(ii) the partial pressure (in bar) of air or other gases in the ullage space being determined by a maximum ullage temperature of 65 C and a liquid expansion due to an increase in mean bulk temperature of tr tf (tf filling temperature, usually 15 C tr 50 C, maximum mean bulk temperature).

The liquid is actually that clear liquid.

This box is used to specify the units of the density of the solute. This is required only if you are specifying the amount of solute in terms of volume.

(ii) the partial pressure (in bar) of air or other gases in the ullage space being determined by a maximum ullage temperature of 65 C and a liquid expansion due to an increase in mean bulk temperature of tr tf (tf filling temperature usually 15 C tr 50 C maximum mean bulk temperature) and

A pipette bulb is used to fill pipettes. Squeezing then releasing the bulb produces a negative pressure, causing fluid to flow into the pipette squeezing the bulb then causes the fluid to flow out of the pipette.

During filling, the temperature of the refrigerated liquefied gas shall be within the limits of the design temperature range.

in which d15 and d50 are the densities of the liquid at 15 oC and 50 oC, respectively.

These great lost trees bled this strange mixture.

During filling, the temperature of the non refrigerated liquefied gas shall fall within the limits of the design temperature range.

Liquid War

Water is a liquid.

Water is liquid.

Liquid Pouring

P200 In paragraph (3)(b), in the sentence preceding the first equation, replace gases for which data are not provided in the table with gases and gas mixtures for which relevant data are not available .

(c) Sprut MBI determination of volumes of intra and extra cellular fluid, total circulating blood volume and the proportion of cellular and fluid blood components in the human body under conditions of weightlessness

FluidBalls

Demo Liquid

4.2.2.7.2 The maximum mass of non refrigerated liquefied gas per litre of shell capacity (kg l) shall not exceed the density of the non refrigerated liquefied gas at 50 C multiplied by 0.95.

Font weight

These are hydraulic brakes. No fluid, they don't work.

FluidBalls

Liquid waste disposal

Through the second bibcock

U thermal conductance of the insulation, in kW.m 2.K 1, at 38 C, t actual temperature of the non refrigerated liquefied gas during filling( C) when this temperature is unknown, let t 15 C.

Figure 1. Total diameter distribution of NaK droplets as modelled for the group of RORSATs above 800 km altitude

You're basically opening up the tubes that drain fluid from the middle ears, which have had them reliably full.

The oil is not liquid.

Water and oil are both liquids.

SELF REACTIVE LIQUID TYPE F

TYPE F, TEMPERATURE CONTROLLED

Utensil Stirring Liquid