A sixinch celluloid scale. Thermometer. Some tweezers.

Thermometer

The thermometer reads 10 degrees.

The thermometer fell to zero last night.

rectTemperatureVariance

A thermometer can be used to determine the temperature of a sample. In a laboratory, special thermometers are used which can also be used within acids or bases.

Somebody knocked.

Contact Thermometer

Design reference temperature_ C

Minimum design temperature _ C

A thermometer.

Thermometers often go below zero.

IMS is designed to measure the density and temperature of electrons in the ionosphere.

Calculation of a temperature index

Design temperature range _ C to _ C.

ATSR is used to measure the surface temperatures of the sea, land and clouds.

Variance of temperature of particles in the measureRect

Minimum design temperature means the temperature which is used for the design and construction of the shell not higher than the lowest (coldest) temperature (service temperature) of the contents during normal conditions of filling, discharge and transport.

The thermometer's on strike.

He used to call me his little thermometer.

In calculating the baseline net greenhouse gas removals by sinks and or actual net greenhouse gas removals by sinks, project participants may choose not to account for one or more carbon pools, and or emissions of the greenhouse gases measured in CO2 equivalents, while avoiding double counting.

Temperature of particles in the measureRect

During filling, the temperature of the refrigerated liquefied gas shall be within the limits of the design temperature range.

Based on the above, an annual heating degree day value is arrived at by calculating the differences between a reference or base temperature (for example, 18ºC) and the average temperature Ti for all the days i of one year, whose average temperature is below the base temperature.

Well, we'll be able to pinpoint that as soon as I get a thermometer.

Contact thermometers differ from regular thermometers in that they are connected to a heating coil, and are hence able to both sense and control the current temperature. In doing so, they allow experiments to be performed under a constant temperature. Contact thermometers work using a negative feedback loop once the desired temperature has been reached, the heating coil is deactivated when the temperature falls, the heating coil is reactivated.

The base and threshold temperatures for calculating the heating degree days are chosen to best satisfy this relation.

During filling, the temperature of the non refrigerated liquefied gas shall fall within the limits of the design temperature range.

How can you play outside with the thermometer in your mouth?

Projecting global GHG emissions methods to estimate future global GHG emissions or removals by sinks

Computes the melting temperature for a nucleic acid duplex.

Shall I send a thermometer up to your room?

Design reference temperature means the temperature at which the vapour pressure of the contents is determined for the purpose of calculating the MAWP.

For substances handled under elevated temperature conditions the design temperature shall be not less than the maximum temperature of the substance during filling, discharge or transport.

The TPA will measure the local Martian thermal (cold, or lowest energy) plasma density, drift velocity and temperature.

Lack of knowledge on ocean heat uptake limits our ability to pin down more precisely the amount of future global temperature rise in the twenty first century due to projected emissions.

We are taking a quiz today over air pressure.

The collection and archiving of all relevant data necessary for estimating or measuring the actual net greenhouse gas removals by sinks during the crediting period.

(b) When applicable, the control and emergency temperatures indicated are appropriate, taking into account the design (e.g. insulation) of the IBC to be used.

So we could say 22.4x is equal to 0.098.

It's like, the average temperature has gone up a tiny little bit, because the nighttime temperatures at the weather stations have come up just a little bit.

For example, variations in winter temperatures influence fuel use for heating, and variations in summer temperatures influence energy demand for air conditioning.

37. In the interests of transparency, when projecting greenhouse gas emissions and removals, and estimating the specific and total effect of policies and measures on emissions and removals, Parties should

(c) A quantitative projection of its net anthropogenic emissions of greenhouse gases through the budget periods and

In terms of 1994 global warming potentials (GWP) CO2 accounted in 1990 for about 80 per cent of total GHG emissions.