For substances handled under elevated temperature conditions the design temperature shall be not less than the maximum temperature of the substance during filling, discharge or transport.

It elevates the temperature.

Pretty high too.

in which df and dr are the densities of the liquid at the mean temperature of the liquid during filling and the maximum mean bulk temperature during transport respectively.

But when it gets too hot, the algae can't make the sugar.

But what if it's super high temperatures?

So temperature is high, you go that way, temperature is low, you go that way.

The temperature's high, sir.

What's it look like? It's too hot to get near enough for a good look, but it's enormous.

Fusible elements used on portable tanks intended for the transport of elevated temperature substances shall be designed to operate at a temperature higher than the maximum temperature that will be experienced during transport and shall be to the satisfaction of the competent authority or its authorized body.

Moreover, this whole, entire region, the south polar region, has elevated temperatures. It's the hottest place on the planet, on the body.

It will be 10,000 degrees on the earth.

This thing heats up by about 15 degrees above ambient temperature amazing.

EB The inside doesn't get very hot.

This is City Hall's green roof, next to Cook County's portion of the roof, which is 77 degrees Fahrenheit hotter at the surface.

EB The outside can get almost as hot as the surface of the Sun.

Thus, the annual total of cooling degree days (CDD) index is calculated by summing the differences of the average temperature Ti and a base temperature (for example, 18ºC) for all days i of one year, whose average temperature is above the base temperature.

It was over 32 degrees Celsius for six months and it basically killed 60 percent of the coral.

4.2.1.9.4 In these formulae, α is the mean coefficient of cubical expansion of the liquid between the mean temperature of the liquid during filling (tf) and the maximum mean bulk temperature during transport (tr) (both in C).

Now over time, this is actually going to heat up the planet.

Now what happens if the temperature is high?

So this positive, if the temperature is high enough and remember, we're dealing with Kelvin, so temperature can only be positive.

Minimum design temperature means the temperature which is used for the design and construction of the shell not higher than the lowest (coldest) temperature (service temperature) of the contents during normal conditions of filling, discharge and transport.

The annual total of heating degree days is higher for cold years, and lower for warm years.

During filling, the temperature of the refrigerated liquefied gas shall be within the limits of the design temperature range.

t actual temperature of the substance during filling (in C) when this temperature is unknown, let t 15 C

A higher than calculated heating rate may be applied initially until a temperature 5 C above the self accelerating decomposition temperature (for a 50 kg package) of the organic peroxide or self reactive substance is reached.

And now what I did there is, I was being nasty, I just turned up the heat again and again.

During filling, the temperature of the non refrigerated liquefied gas shall fall within the limits of the design temperature range.

But I think you get the idea that if the temperature's really high, it seems less likely that these guys are going to kind of drift near each other just right to be able to attach to each other, and their electrons to get more stable, and to do this whole exothermic thing.

We have to hold something at 150 million degrees.

It boils away in the middle at 150 million degrees.

When temperature is high, entropy matters a lot.

There are even more dramatic increases in Tokyo. In August, temperatures there climbed 12.5oC above the surrounding countryside, reaching 40oC a scorching heat that affected not only the downtown area, but also covered some 8,000 square kilometers.

4.2.1.9.5 The requirements of 4.2.1.9.2 to 4.2.1.9.4.1 do not apply to portable tanks which contain substances maintained at a temperature above 50 ºC during transport (e.g. by means of a heating device).

It doesn't do any damage, but it elevates the temperature by a few degrees.

The whole process is very sensitive to temperature and humidity.

the partial pressure (in bar) of air or other gases in the ullage space being determined by the design reference temperature and the liquid phase expansion due to the increase of the mean bulk temperature of tr tf (tf filling temperature, usually 15 C, tr 50 C maximum mean bulk temperature).

So when temperature is high, entropy matters.

So this lower bar is the upper atmosphere, the stratosphere, and it heats up after these volcanoes.

(ii) the partial pressure (in bar) of air or other gases in the ullage space being determined by a maximum ullage temperature of 65 C and a liquid expansion due to an increase in mean bulk temperature of tr tf (tf filling temperature, usually 15 C tr 50 C, maximum mean bulk temperature).

U thermal conductance of the insulation, in kW.m 2.K 1, at 38 C, t actual temperature of the non refrigerated liquefied gas during filling( C) when this temperature is unknown, let t 15 C.

4.2.1.9.5.1 The maximum degree of filling (in ) for liquids transported under elevated temperature conditions is determined by the formula

Shanghai summers can reach temperatures of up to 38 9 degrees. That is extremely hot!

Delete the second sentence ( The package shall exceeds 50 C.