It elevates the temperature.

Pretty high too.

Very hostile environments, 150 C, 10,000 PSI.

But what if it's super high temperatures?

So temperature is high, you go that way, temperature is low, you go that way.

So, the electromagnetic force, the force that holds us together, gets stronger as you go to higher temperatures.

The temperature's high, sir.

Moreover, this whole, entire region, the south polar region, has elevated temperatures. It's the hottest place on the planet, on the body.

It will be 10,000 degrees on the earth.

This thing heats up by about 15 degrees above ambient temperature amazing.

EB The inside doesn't get very hot.

For substances handled under elevated temperature conditions the design temperature shall be not less than the maximum temperature of the substance during filling, discharge or transport.

This is City Hall's green roof, next to Cook County's portion of the roof, which is 77 degrees Fahrenheit hotter at the surface.

EB The outside can get almost as hot as the surface of the Sun.

Thus, the annual total of cooling degree days (CDD) index is calculated by summing the differences of the average temperature Ti and a base temperature (for example, 18ºC) for all days i of one year, whose average temperature is above the base temperature.

It was over 32 degrees Celsius for six months and it basically killed 60 percent of the coral.

67. Advanced structural ceramics (ASCs) are used in applications where high mechanical strength at high temperature, wear resistance, low density, corrosion resistance, hardness, stiffness and light weight are critical performance parameters.

Now over time, this is actually going to heat up the planet.

Now what happens if the temperature is high?

So this positive, if the temperature is high enough and remember, we're dealing with Kelvin, so temperature can only be positive.

Minimum design temperature means the temperature which is used for the design and construction of the shell not higher than the lowest (coldest) temperature (service temperature) of the contents during normal conditions of filling, discharge and transport.

The annual total of heating degree days is higher for cold years, and lower for warm years.

And now what I did there is, I was being nasty, I just turned up the heat again and again.

Hurricane intensity is expected to increase as greenhouse gas concentrations in the atmosphere rise.

(a) the pressure (in bar or kPa) or temperature (in C) at which it is set to discharge

We have to hold something at 150 million degrees.

It boils away in the middle at 150 million degrees.

When temperature is high, entropy matters a lot.

There are even more dramatic increases in Tokyo. In August, temperatures there climbed 12.5oC above the surrounding countryside, reaching 40oC a scorching heat that affected not only the downtown area, but also covered some 8,000 square kilometers.

It doesn't do any damage, but it elevates the temperature by a few degrees.

Fusible elements used on portable tanks intended for the transport of elevated temperature substances shall be designed to operate at a temperature higher than the maximum temperature that will be experienced during transport and shall be to the satisfaction of the competent authority or its authorized body.

(c) the reference temperature corresponding to the rated pressure for frangible discs

the partial pressure (in bar) of air or other gases in the ullage space being determined by the design reference temperature and the liquid phase expansion due to the increase of the mean bulk temperature of tr tf (tf filling temperature, usually 15 C, tr 50 C maximum mean bulk temperature).

So when temperature is high, entropy matters.

So this lower bar is the upper atmosphere, the stratosphere, and it heats up after these volcanoes.

in which df and dr are the densities of the liquid at the mean temperature of the liquid during filling and the maximum mean bulk temperature during transport respectively.

Hotspot information was derived from fire temperature, fire intensity and burning area.

(ii) the partial pressure (in bar) of air or other gases in the ullage space being determined by a maximum ullage temperature of 65 C and a liquid expansion due to an increase in mean bulk temperature of tr tf (tf filling temperature, usually 15 C tr 50 C, maximum mean bulk temperature).

4.2.1.9.5.1 The maximum degree of filling (in ) for liquids transported under elevated temperature conditions is determined by the formula

Shanghai summers can reach temperatures of up to 38 9 degrees. That is extremely hot!

But when it gets too hot, the algae can't make the sugar.

Delete the second sentence ( The package shall exceeds 50 C.

But what happens here if the temperature of our system is high?

According to the underlying science that Bush ignores, hurricanes take their energy from the warmth of seawater. That is why hurricanes occur in hot tropical regions, and at the end of the summer months, when the sea surface temperatures are at their annual maximum.

This will typically involve the requirement to operate in temperature ranges from Hot Dry (Storage Temperature 71 C and Operational temperature without solar loading of 49 C), down to Cold (Storage Temperature 46 C and Operating temperature 46 C.