For welded shells, only a material whose weldability has been fully demonstrated shall be used.

For welded shells and jackets only materials whose weldability has been fully demonstrated shall be used.

Compressor Welding equipment

The materials shall in principle conform to national or international material standards. For welded shells only a material whose weldability has been fully demonstrated shall be used.

Oxygen gas welding kit

Heavy duty MIG welder Hydraulic trolley

(b) Welder (1 post).

They're slow in a partwelded hull.

What does he do weld 'em?

Metalwork basic metalwork, welding and soldering, ornamental wrought iron work, tool repair, machine maintenance and repair, tin work, etc.

Welded pipe joints shall be used wherever possible.

Now here, I'm going to do a very poor job of silver soldering.

Why welding and why not computers?

In November 1994, NASA and the Paton Welding Institute in Kiev, Ukraine, initiated a joint project called the International Space Welding Experiment.

Elsewhere pipe joints shall be welded when necessary.

Regulations on permissible noise levels from arc welding equipment, No. 331 1994

Welds shall be skillfully made and afford complete safety.

Welds shall be skilfully made and afford complete safety.

You see a girl here who is trained as a welder.

They were real soldering gun type guys, and they actually built this thing.

I mean, real jewelers put little bits of solder in.

This is not the way they teach you to silver solder when you're in school.

Plate products are used for ship building, construction, large diameter welded pipes and boiler applications.

Have to use a acetylene torch to get him out.

My life completely changed when I found a spot welder.

6.6.2.5.9 Joints in copper tubing shall be brazed or have an equally strong metal union.

6.6.3.5.11 Joints in copper tubing shall be brazed or have an equally strong metal union.

6.6.4.5.11 Joints in copper tubing shall be brazed or have an equally strong metal union.

She is an illiterate girl, trained, skilled as a welder.

It was made of 40 and 50 centimeter diameter steel pipes welded roughly together.

6.6.2.3.3.2 Steels which have a Re Rm ratio of more than 0.85 are not allowed for the construction of welded shells.

6.6.3.3.3.2 Steels which have a Re Rm ratio of more than 0.85 are not allowed for the construction of welded shells.

6.6.4.3.3.2 Steels which have a Re Rm ratio of more than 0.85 are not allowed for the construction of welded shells.

They're just going to blow apart.

And what you do is you put it together in three layers, you weld it around the edge, and then you inflate it.

When an existing opening is closed it shall be accomplished by internally and externally welding one plate to the shell.

The melting point of brazing materials shall be no lower than 525 C. The joints shall not decrease the strength of the tubing as may happen when cutting threads.

The melting point of brazing materials shall be no lower than 525 C. The joints shall not decrease the strength of tubing as may happen when cutting threads.

The melting point of brazing materials shall be no lower than 525 C. The joints shall not decrease the strength of the tubing as may happen by cutting of threads.

Los Alamos National Laboratory, New Mexico, pressed the initial flight pellets of Pu 238 and welded these pellets into the iridium capsules.

Lower rates of acceptance were seen for female trainees in industrial maintenance and soldering.

It is also planned to include other skills such as carpentry, welding, upholstery and tailoring and dressmaking

The recorded expenditure reflects the purchase of one vehicle lift, one hydraulic crane and welding equipment.

When the manufacturing process or the materials make it necessary, the shells shall be suitably heat treated to guarantee adequate toughness in the weld and in the heat affected zones.

When the manufacturing process or the materials make it necessary, the shells shall be suitability heat treated to guarantee adequate toughness in the weld and in the heat affected zones.