For welded shells, only a material whose weldability has been fully demonstrated shall be used.

The materials shall in principle conform to national or international material standards. For welded shells only a material whose weldability has been fully demonstrated shall be used.

For welded shells and jackets only materials whose weldability has been fully demonstrated shall be used.

And what you do is you put it together in three layers, you weld it around the edge, and then you inflate it.

Compressor Welding equipment

Oxygen gas welding kit

Heavy duty MIG welder Hydraulic trolley

(b) Welder (1 post).

They're slow in a partwelded hull.

What does he do weld 'em?

Metalwork basic metalwork, welding and soldering, ornamental wrought iron work, tool repair, machine maintenance and repair, tin work, etc.

There are six layers three layers of plastic, aluminum which are are sealed together.

Los Alamos National Laboratory, New Mexico, pressed the initial flight pellets of Pu 238 and welded these pellets into the iridium capsules.

Welded pipe joints shall be used wherever possible.

The melting point of brazing materials shall be no lower than 525 C. The joints shall not decrease the strength of the tubing as may happen when cutting threads.

The melting point of brazing materials shall be no lower than 525 C. The joints shall not decrease the strength of tubing as may happen when cutting threads.

The melting point of brazing materials shall be no lower than 525 C. The joints shall not decrease the strength of the tubing as may happen by cutting of threads.

Now here, I'm going to do a very poor job of silver soldering.

And that data, layer by layer, gets passed through the machine, starting at the base of the product and depositing material, layer upon layer, infusing the new layer of materials to the old layer in an additive process.

Why welding and why not computers?

And this material that's deposited either starts as a liquid form or a material powder form.

Subjects of the investigations were none ablative materials (fibre reinforced ceramics), ablative materials, flexible (FEI) and multilayer insolations (MLI) as well as carbon fibre reinforced plastic (CFRP) plates and sandwich panels.

In November 1994, NASA and the Paton Welding Institute in Kiev, Ukraine, initiated a joint project called the International Space Welding Experiment.

Elsewhere pipe joints shall be welded when necessary.

Regulations on permissible noise levels from arc welding equipment, No. 331 1994

Welds shall be skillfully made and afford complete safety.

Welds shall be skilfully made and afford complete safety.

You see a girl here who is trained as a welder.

They were real soldering gun type guys, and they actually built this thing.

I mean, real jewelers put little bits of solder in.

This is not the way they teach you to silver solder when you're in school.

When the manufacturing process or the materials make it necessary, the shells shall be suitably heat treated to guarantee adequate toughness in the weld and in the heat affected zones.

When the manufacturing process or the materials make it necessary, the shells shall be suitability heat treated to guarantee adequate toughness in the weld and in the heat affected zones.

When the manufacturing process or the materials make it necessary, the shell shall be suitably heat treated to guarantee adequate toughness in the weld and in the heat affected zones.

Plate products are used for ship building, construction, large diameter welded pipes and boiler applications.

Have to use a acetylene torch to get him out.

Aquifer States shall employ their best efforts to collect and, where appropriate, to process data and information in a manner that facilitates its utilization by the other aquifer States to which it is communicated.

(b) be jacketed with a material having a melting point of 700 C or greater.

My life completely changed when I found a spot welder.

6.6.2.5.9 Joints in copper tubing shall be brazed or have an equally strong metal union.

6.6.3.5.11 Joints in copper tubing shall be brazed or have an equally strong metal union.

6.6.4.5.11 Joints in copper tubing shall be brazed or have an equally strong metal union.

These capsules are embedded in a nutrient rich jelly, a kind of second skin, which dissolves quickly and becomes baby food for the growing mushrooms.

She is an illiterate girl, trained, skilled as a welder.

It was made of 40 and 50 centimeter diameter steel pipes welded roughly together.