For welded shells, only a material whose weldability has been fully demonstrated shall be used.

The materials shall in principle conform to national or international material standards. For welded shells only a material whose weldability has been fully demonstrated shall be used.

For welded shells and jackets only materials whose weldability has been fully demonstrated shall be used.

Compressor Welding equipment

Oxygen gas welding kit

In November 1994, NASA and the Paton Welding Institute in Kiev, Ukraine, initiated a joint project called the International Space Welding Experiment.

Heavy duty MIG welder Hydraulic trolley

(b) Welder (1 post).

They're slow in a partwelded hull.

What does he do weld 'em?

Metalwork basic metalwork, welding and soldering, ornamental wrought iron work, tool repair, machine maintenance and repair, tin work, etc.

The amount of the childcare allowance for a child under the age of one year and a half is 30 LVL per month.

Los Alamos National Laboratory, New Mexico, pressed the initial flight pellets of Pu 238 and welded these pellets into the iridium capsules.

The amount of the childcare allowance for a child under the age of a year and a half is 30 LVL per month.

The benefit for persons, who take care of a one and a half to three years old child, is 7.50 LVL per month.

Welded pipe joints shall be used wherever possible.

Persons who take care of a child from the age of one year and a half to three years receive a benefit in the amount of 7.50 LVL per month.

The melting point of brazing materials shall be no lower than 525 C. The joints shall not decrease the strength of the tubing as may happen when cutting threads.

The melting point of brazing materials shall be no lower than 525 C. The joints shall not decrease the strength of tubing as may happen when cutting threads.

The melting point of brazing materials shall be no lower than 525 C. The joints shall not decrease the strength of the tubing as may happen by cutting of threads.

Now here, I'm going to do a very poor job of silver soldering.

I don't suppose there's a drink left?

Why welding and why not computers?

Elsewhere pipe joints shall be welded when necessary.

Regulations on permissible noise levels from arc welding equipment, No. 331 1994

Welds shall be skillfully made and afford complete safety.

Welds shall be skilfully made and afford complete safety.

Ten days, two weeks.

Red lightning was fed only a half portion of feed...

You see a girl here who is trained as a welder.

They were real soldering gun type guys, and they actually built this thing.

I mean, real jewelers put little bits of solder in.

First we have to know how much loss can we take.

This is not the way they teach you to silver solder when you're in school.

After all, a couple more weeks can't make any difference.

It's Half Moon stock.

In oneandahalf month's time

Source Bulletin of Personnel Statistics second semester 2003

When the manufacturing process or the materials make it necessary, the shells shall be suitably heat treated to guarantee adequate toughness in the weld and in the heat affected zones.

When the manufacturing process or the materials make it necessary, the shells shall be suitability heat treated to guarantee adequate toughness in the weld and in the heat affected zones.

When the manufacturing process or the materials make it necessary, the shell shall be suitably heat treated to guarantee adequate toughness in the weld and in the heat affected zones.

Plate products are used for ship building, construction, large diameter welded pipes and boiler applications.

Have to use a acetylene torch to get him out.

You know, I've been using it for two and a half months.

Used up a little more than five and a half months of it.