Test pressure means the maximum gauge pressure at the top of the shell during the pressure test

6.6.2.15.1 Each pressure relief device inlet shall be situated on top of the shell in a position as near the longitudinal and transverse centre of the shell as reasonably practicable.

6.6.3.11.1 Each pressure relief device inlet shall be situated on top of the shell in a position as near the longitudinal and transverse centre of the shell as reasonably practicable.

6.6.4.10.1 All pressure relief device inlets shall be situated on top of the shell in a position as near the longitudinal and transverse centre of the shell as reasonably practicable.

For insulated portable tanks, top fittings shall be surrounded by a spill collection reservoir with suitable drains.

Test pressure means the maximum gauge pressure at the top of the shell during the hydraulic pressure test equal to not less than 1.5 times the design pressure.

Pots.

The top of the tank is provided with either a 1 mm opening which simulates the pressure relief valve (PRV) of the IBC or tank or a real PRV of a diameter which is scaled using the vent area to vessel volume ratio.

The temperature inside the tank is measured by means of three thermocouples, two located in the liquid phase (near the top and bottom) and one in the gas phase.

Maximum allowable working pressure (MAWP) means a pressure that shall be not less than the highest of the following pressures measured at the top of the shell while in operating position

Maximum allowable working pressure (MAWP) means the maximum effective gauge pressure permissible at the top of the shell of a loaded portable tank in its operating position including the highest effective pressure during filling and discharge

6.6.2.4.4 The cylindrical portions, ends (heads) and manhole covers of all shells shall be not less than 3 mm thick regardless of the material of construction.

It's better than doing pots.

They shall be placed at the top of the shell with their inlets in the vapour space and in no case shall they be shielded from external heat.

Road tank vehicles, rail tank wagons, non metallic tanks and intermediate bulk containers (IBCs) are not considered to fall within the definition for portable tanks

And I've got to do the pots all week.

Road tank vehicles, rail tank wagons, non metallic tanks, intermediate bulk containers (IBCs), gas cylinders and large receptacles are not considered to fall within the definition for portable tanks

For tanks

Candy

Any specific style? This one, this one...

Kettle, kettle on the hob

Maximum allowable working pressure (MAWP) means a pressure that shall be not less than the highest of the following pressures measured at the top of the shell while in operating position, but in no case less than 7 bar

Peak to peak distance

Peak to peak distance

Spraycan

Water tanks

Take the pitcher.

(a) Portable tanks The tank shall be filled with water or any other non pressurized substance to approximately 97 of the tank volumetric capacity.

Bowler, bowler.

That's 18 shots. We've used two already.

Like a Morandi like the little bottles composing them like a still life.

(b) when leaking

Trailer, water

Trailer, fuel

Tinned salmon.

Canned milk.

Fruit cans.

Canned foods?

The ghee tin

I pop up the top, and there's a cupola.

MICHAEL Roof repair.

The can is empty.

The jar is empty.

Portable Tanks

Put one can back!