6.6.4.4.4 For vacuum insulated tanks, the aggregate thickness of the jacket and the shell shall correspond to the minimum thickness prescribed in 6.6.4.4.2, the thickness of the shell itself being not less than the minimum thickness prescribed in 6.6.4.4.3.

eo minimum thickness (in mm) for the reference steel specified in 6.6.3.4.2

eo minimum thickness (in mm) of the reference steel specified in 6.6.4.4.2 and 6.6.4.4.3

Thickness

All parts of the shell shall have a minimum thickness as determined by 6.6.2.4.2 to 6.6.2.4.4.

All parts of the shell shall have a minimum thickness as determined by 6.6.3.4.1 to 6.6.3.4.3.

Attention is drawn to the minimum shell thickness requirements, specified in 6.6.4.4.2 to 6.6.4.4.7.

All parts of the shell shall have a minimum thickness as determined by 6.6.4.4.1 to 6.6.4.4.6.

Attention is drawn to the minimum shell thickness requirements for these shells specified in 6.6.3.4.

6.6.3.4.5 In no case shall the wall thickness be less than that prescribed in 6.6.3.4.1 to 6.6.3.4.3.

6.6.4.4.7 In no case shall the wall thickness be less than that prescribed in 6.6.4.4.1 to 6.6.3.4.5.

6.6.2.4.7 When in the applicable portable tank instruction in 4.2.4.2.6, a minimum thickness of 8 mm, 10 mm or 12 mm is specified, it shall be noted that these thicknesses are based on the properties of the reference steel and a shell diameter of 1.80 m.

Attention is drawn to the minimum shell thickness requirements for these tanks specified in 6.6.2.4.1 to 6.6.2.4.10.

6.6.2.4.8 In no case shall the wall thickness be less than that prescribed in 6.6.2.4.2, 6.6.2.4.3 and 6.6.2.4.4.

10. Massive Indonesian migration

L thickness of insulation layer m

L thickness of insulation layer m

6.6.2.4 Minimum shell thickness

6.6.3.4 Minimum shell thickness

6.6.4.4 Minimum shell thickness

There have been considerable reductions in nuclear weapons arsenals.

This thickness shall be exclusive of any corrosion allowance.

And the scale and the speed of this system is truly breathtaking.

6.6.3.4.4 The equivalent thickness of a steel other than the thickness prescribed for the reference steel in 6.6.3.4.2 shall be determined using the following formula

6.6.2.4.6 The equivalent thickness of a metal other than the thickness prescribed for the reference steel in 6.6.2.4.3 shall be determined using the following equation

The thickness of aluminium liner is 2.1 mm.

Equivalent thickness in reference steel _ mm

Stamp of expert who performed or witnessed the most recent test _

(b) the minimum thickness determined in accordance with the recognized pressure vessel code including the requirements in 6.6.3.3.

(b) the minimum thickness determined in accordance with the recognized pressure vessel code including the requirements in 6.6.4.3.

(ii) is approximately of the same size and mass as the existing equipment and

Shells of more than 1.80 m in diameter shall be not less than 6 mm thick in the reference steel or of equivalent thickness in the steel to be used.

6.6.4.4.6 The equivalent thickness of a metal other than the thickness prescribed for the reference steel in 6.6.4.4.2 and 6.6.4.4.3 shall be determined using the following equation

Shells of more than 1.80 m in diameter shall be not less than 6 mm thick in the reference steel or of equivalent thickness in the metal to be used.

(b) the minimum thickness determined in accordance with the recognized pressure vessel code including the requirements in 6.6.2.3 and

Box 4 How big is electronic commerce and how fast will it grow?

Shells more than 1.80 m in diameter shall be not less than 4 mm thick in the reference steel or of equivalent thickness in the metal to be used.

6.6.4.4.2 Shells of not more than 1.80 m in diameter shall be not less than 5 mm thick in the reference steel or of equivalent thickness in the metal to be used.

Such shells of more than 1.80 m in diameter shall be not less than 4 mm thick in the reference steel or of equivalent thickness in the metal to be used.

Shells more than 1.80 m in diameter shall be not less than 6 mm thick in the reference steel or of equivalent thickness in the metal to be used, except that for powdered or granular solid substances of Packing Group II or III the minimum thickness requirement may be reduced to not less than 5 mm thick in the reference steel or of equivalent thickness in the metal to be used.

Most regulations are flexible with respect to the extent of disclosure.

7. Massive Indonesian migration to East Timor

It's created depositing layers of about four microns.

Minimum shell thickness (mm reference steel) Bottom opening requir ements

(a) the minimum thickness determined in accordance with the requirements in 6.6.3.4 and