3.2.1 Shielding

Incorporation of fail safe, sterilization, self destruct features, et cetera, should be considered (reference STANAG 4187).

3.2.1 Shielding 105 111 25

Where necessary, stacked packages shall be prevented from damaging the package below by the use of load bearing devices.

Replacement of worn out and damaged furniture and fixtures.

We're hit bad, sir, in radio compartment. On fire.

6.6.2.15.2 Arrangements shall be made to prevent access to the pressure relief devices by unauthorized persons and to protect the devices from damage caused by the portable tank overturning.

6.6.3.11.2 Arrangements shall be made to prevent access to the pressure relief devices by unauthorized persons and to protect the devices from damage caused by the portable tank overturning.

6.6.4.10.2 Arrangements shall be made to prevent access to the devices by unauthorized persons and to protect the devices from damage caused by the portable tank overturning.

I installed an anti theft device onto my bike.

During searches of the area, IDF detected a second device which was detonated by IDF sappers.

Bumper shields should be positioned at sufficient distance from the shielded object to ensure a wide dispersion of the fragment cloud, created as a result of the impact of the debris particles on the shield.

The transport unit shall be constructed in such a way as to prevent the loss of contents.

Bumper shields should be positioned at sufficient distance from the shielded object to ensure a wide dispersion of the fragment cloud, created as a result of the impact of the debris particles on the shield.

b) installations designed for protection against the release of pollutants,

Protection strategies for manned missions have to incorporate both shielding measures and on orbit repair of damage caused by penetrations.

Protection strategies for manned missions may incorporate both shielding measures and on orbit repair of damage caused by penetrations.

There may be some mass penalty to include devices to minimize the creation of debris and devices fuel used to implement manoeuvres for ending mission life.

The probability of no penetration (PNP) is the main criterion for shield design.

7.1.1.5 The interior and exterior of a transport unit shall be inspected prior to loading to ensure that there is no damage that could affect its integrity or that of the packages to be loaded in it.

(v) the valve shall continue to be effective in the event of damage to the external device for controlling the operation of the valve

4.2.1.13.10 Vacuum relief devices and spring loaded valves shall be provided with flame arresters.

The filling and discharge devices (including flanges or threaded plugs) and any protective caps shall be capable of being secured against unintended opening.

c) destroys or causes extensive damage to public installations, transport or telecommunication systems, including information systems, fixed platforms on the continental shelf, power supply installations, water supply installations, medical or any other important facilities, public places or property with the aim to endanger human lives, the safety of an installation, system or place, or to expose property to the risk of extensive damage,

The designer will attempt to ensure that the electrically initiated devices (EID) are adequately screened to prevent the inadvertent exposure of the EID that electromagnetic radiation EMR.

MOTAPM with anti handling devices (AHD) are a defensive weapon permissible according to international humanitarian law.

7.1.1.9 During loading and unloading, packages containing dangerous goods shall be protected from being damaged.

Weigh bridges should also be installed in ports to verify container weights and to control axle loads in order to prevent damage to road surfaces.

Self neutralization mechanism means an incorporated automatically functioning mechanism which renders inoperable the munition into which it is incorporated.

Recommended measures include the expulsion of residual propellants by burning or venting, the discharge of electrical storage devices, the release of pressurized fluids, thermal control and safing of unused destruct devices and the unloading (despinning) of momentum wheels and similar attitude control apparatus.

Effectivemeasures include the expulsion of residual propellants by burning or venting, the discharge of electrical storage devices, the release of pressurized fluids, thermal control and safing of unused destruct devices and the unloading (despinning) of momentum wheels and similar attitude control apparatus.

The pressure relief devices shall have sufficient capacity to prevent rupture of the shell due to over pressurization or vacuum resulting from filling, discharging, or from heating of the contents.

Current shield designs offer protection against objects smaller than 1 cm.

Where restraints such as banding or straps are used, these shall not be over tightened to cause damage or deformation of the package.

(c) when damaged to such an extent that the integrity of the portable tank or its lifting or securing arrangements may be affected

Self destruction mechanism means an incorporated or externally attached automatically functioning mechanism which secures the destruction of the munition into which it is incorporated or to which it is attached.

6.6.2.15 Siting of pressure relief devices

6.6.3.11 Siting of pressure relief devices

6.6.4.10 Siting of pressure relief devices

6.6.4.2.3 Contact between dissimilar metals which could result in damage by galvanic action shall be avoided.

4.2.1.13.6 Portable tanks shall be fitted with pressure relief devices and emergency relief devices.

12. Orbital debris shields for both manned and unmanned spacecraft can be quite effective.

Protection against particles 0.1 1 cm in size can be achieved by shielding spacecraft structures.

7.1.1.7 Packages containing dangerous goods and unpackaged articles of dangerous goods shall be secured by suitable means capable of restraining the goods (such as fastening straps, sliding slatboards, adjustable brackets) in the transport unit in a manner that will prevent any movement during transport which would change the orientation of the packages or cause them to be damaged.

d) public installations designed for protection against fire, flood or any other natural disasters,