Canned milk.

(canned laughter continues)

That thick stuff ain't fit to squirt in coffee.

(canned laughter)

(screaming canned laughter)

Most moms cooked like mine a piece of broiled meat, a quickly made salad with bottled dressing, canned soup, canned fruit salad.

And you can, him.

4.2.1.13.5 Portable tanks shall be fitted with temperature sensing devices.

6.6.2.5.2 All openings in the shell, intended for filling or discharging the portable tank shall be fitted with a manually operated stop valve located as close to the shell as reasonably practicable.

(a) Portable tanks The tank shall be filled with water or any other non pressurized substance to approximately 97 of the tank volumetric capacity.

4.2.1.13.6 Portable tanks shall be fitted with pressure relief devices and emergency relief devices.

6.6.4.6.1 Every shell shall be provided with not less than two independent spring loaded pressure relief devices.

Shell means the part of the portable tank which retains the substance intended for transport (tank proper), including openings and their closures, but does not include service equipment or external structural equipment

6.6.2.7.1 All portable tanks shall be fitted with at least one pressure relief device.

6.6.3.5.2.1 When a portable tank is fitted with an excess flow valve the excess flow valve shall be so fitted that its seating is inside the shell or inside a welded flange or, when fitted externally, its mountings shall be designed so that in the event of impact its effectiveness shall be maintained.

6.6.3.7.1 Portable tanks shall be provided with one or more spring loaded pressure relief devices.

Permanent lifting and tie down attachments shall be fitted to all portable tanks. Preferably they shall be fitted to the portable tank supports but may be secured to reinforcing plates located on the shell at the points of support.

Permanent lifting and tie down attachments shall be fitted to all portable tanks. Preferably they shall be fitted to the portable tank supports but may be secured to reinforcing plates located on the tank at the points of support.

Primary Bundle

Secondary Bundle

Tertiary Bundle

No reprocessing or export of spent fuel has ever taken place.

The portable tank includes a shell fitted with service equipment and structural equipment necessary for the transport of gases.

15 The portable tank may be fitted with a device located under maximum filling conditions in the vapour space of the shell to prevent the build up of excess pressure due to the slow decomposition of the substance transported.

You're trapped. You're in a tin can.

Dadier, is that tin can full of money yet?

Shell means the part of the portable tank which retains the non refrigerated liquefied gas intended for transport (tank proper), including openings and their closures, but does not include service equipment or structural equipment

4.2.1.10.1 All portable tanks intended for the transport of flammable liquids shall be closed and be fitted with relief devices in accordance with 6.6.2.8 to 6.6.2.15.

6.6.2.2.7 The materials of the portable tank, including any devices, gaskets, linings and accessories, shall not adversely affect the substances intended to be transported in the portable tank.

Does this fit?

I'm trying to buy you a suit.

6.6.2.2.11 Vacuum relief devices used on portable tanks intended for the transport of substances meeting the flash point criteria of Class 3, including elevated temperature substances transported at or above their flash point, shall prevent the immediate passage of flame into the shell, or the portable tank shall have a shell capable of withstanding, without leakage an internal explosion resulting from the passage of flame into the shell.

This device shall also prevent an unacceptable amount of leakage of liquid in the case of overturning or entry of foreign matter into the tank.

The portable tank includes a shell fitted with service equipment and structural equipment necessary for the transport of dangerous substances.

(c) When the protective covering is so closed as to be gas tight, a device shall be provided to prevent any dangerous pressure from developing in the insulating layer in the event of inadequate gas tightness of the shell or of its items of equipment

6.6.2.8.5 When the shell is fitted for pressure discharge, the inlet line shall be provided with a suitable pressure relief device set to operate at a pressure not higher than the MAWP of the shell, and a stop valve shall be fitted as close to the shell as reasonably practicable.

Pre School Bundle

Shirts, suits, coats, socks.

(a) an external stop valve fitted as close to the shell as reasonably practicable and

6.6.3.12.1 Unless a portable tank is intended to be filled by weight it shall be equipped with one or more gauging devices.

6.6.4.11.1 Unless a portable tank is intended to be filled by weight, it shall be equipped with one or more gauging devices.

External fittings shall be protected so as to preclude the release of the shell contents upon impact or overturning of the portable tank on its fittings.

I'll put you in the blue suite. We'll have a wonderful time.

A new suit and ten bucks.

Get the, uh, champ some gear. Sure.